Automatic 2000 Gph Bilge Pump 24 Volt RM2000A-24
The Rule-Mate® 2000 GPH pump consists of a powerful Rule® bilge pump and a highly intelligent circuit board in a single housing.
The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8".
Rule-Mate Bilge pumps have built-in programming that can sense when the pump is running but not pumping water.
This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries.
If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes.
Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8".
2000 GPH (7570 LPH) at 0' (13.6V)
All-in-one pump and switch
Extra long life heavy duty motor
1" NPS discharge with 1" AND 1 1/8" screw-on ports
Three year warranty.
Size RM1500A & RM2000A: 4-1/4" D x 7-1/4" W, footprint 6-1/4" x 4-1/4".
GPH: 2000 GPH (7570 LPH) at 0' (27.2V)
Discharge Outlet: 1-1/8"
Warranty: 3-Year limited warranty.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov