Result Pages:
T & R SR25 Boat Seat Box

T & R SR25 Boat Seat Box

This Seat Box allows a swivel seat to be installed to the bench seat in an aluminum or fiberglass boat with ease.

Holes are pre-drilled for attaching the seat to the bench seat in the boat.
The seat box sets the swivel seat approximately 3-1/4 inches higher which allows for better visibility and casting.

A slot in the seat box allows for storage under the seat.
This unit is constructed of aluminum for lightweight strength and durability.

Seat & swivel not included.…

Manufacturer
T & R Marine
Model
5600666
T Handle 500/ 900/1000 Series Water Separators Racor RK11888

Racor RK11888 T Handle 500/ 900/1000 Series Water Separators

Racor Replacement T-handle Kit for 500/900/1000 series separators Includes O-ring.…

Manufacturer
Racor/Parker
Model
62-RK11888
T Handle Flush Latch Blk/Chrome Offset Cam Locking

T Handle Flush Latch Blk/Chrome Offset Cam Locking

Perko "T' handle flush lock is for smooth and carpeted surfaces.
Chrome plated zinc "T" handle and Stainless Steel stem.

Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick
All have a 3" diameter face plate.
DP1 cam bar adjustment 3/4" - 2-3/8"

The T - Handle drops down flush in either the open or closed (180° Rotation) position. (except with the offset cam bar positioned upward)
The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion.
Lock with 2 Keys provided

Color: Black Housing, Chrome "T" Handle
Type: Locking
Mounting Hole: 2-1/2"
Faceplate: 3" diameter
Cam Bar: Offset 3/4" - 2-3/8"

SKU: 9-1091DP1BLK…

Manufacturer
Perko
Model
9-1091DP1BLK
T Handle Flush Latch Blk/Chrome Offset Cam N/Locking 1092DP1BLK

T Handle Flush Latch Blk/Chrome Offset Cam N/Locking 1092DP1BLK

Perko "T' handle flush latch is for smooth and carpeted surfaces.
Chrome plated zinc "T" handle and Stainless Steel stem.

Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick
All have a 3" diameter face plate.
DP1 cam bar adjustment 3/4" - 2-3/8"

The T-Handle drops down flush in either the open or closed (180° Rotation) position. (except with the offset cam bar positioned upward)

Color: Black Housing, Chrome "T" Handle
Type: Latch Non-Locking
Mounting Hole: 2-1/2"
Faceplate: 3" diameter
Cam Bar: Offset 3/4" - 2-3/8"

SKU: 9-1092DP1BLK.…

Manufacturer
Perko
Model
9-1092DP1BLK
T Handle Flush Latch White/Chrome Offset Cam Locking 1091DP1WHT

T Handle Flush Latch White/Chrome Offset Cam Locking 1091DP1WHT

Perko "T' handle flush latch is for smooth and carpeted surfaces.
Chrome plated zinc "T" handle and Stainless Steel stem.

Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick
All have a 3" diameter face plate.
DP1 cam bar adjustment 3/4" - 2-3/8"

The T-Handle drops down flush in either the open or closed (180° Rotation) position. (except with the offset cam bar positioned upward)

Color: White Housing, Chrome "T" Handle
Type: Latch Locking
Mounting Hole: 2-1/2"
Faceplate: 3" diameter
Cam Bar: Offset 3/4" - 2-3/8

SKU: 9-1091DP1WHT.…

Manufacturer
Perko
Model
9-1091DP1WHT
T Handle Flush Latch White/Chrome Offset Cam N/Lock 1092DP1WHT

T Handle Flush Latch White/Chrome Offset Cam N/Lock 1092DP1WHT

Perko "T' handle flush latch is for smooth and carpeted surfaces.
Chrome plated zinc "T" handle and Stainless Steel stem.

Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick
All have a 3" diameter face plate.
DP1 cam bar adjustment 3/4" - 2-3/8"

The T-Handle drops down flush in either the open or closed (180° Rotation) position. (except with the offset cam bar positioned upward)

Color: White Housing, Chrome "T" Handle
Type: Latch Non-Locking
Mounting Hole: 2-1/2"
Faceplate: 3" diameter
Cam Bar: Offset 3/4" - 2-3/8

SKU: 9-1092DP1WHT.…

Manufacturer
Perko
Model
9-1092DP1WHT
T Handle Flush Latch White/Chrome Offset XL Cam 1091DP4BLK

T Handle Flush Latch Black/Chrome Offset XL Cam 1091DP4BLK

Perko "T' handle flush latch is for smooth and carpeted surfaces.
Chrome plated zinc "T" handle and Stainless Steel stem.

Easily Installs in a 2-1/2 Inch Diameter Hole for Mounting Surfaces 1/8 to 3/4 Inch Thick
All have a 3" diameter face plate.
DP4 cam bar adjustment 1/2" - 3"

The T-Handle drops down flush in either the open or closed (180° Rotation) position. (except with the offset cam bar positioned upward)
The rubber seal & boot under the T - Handle seals the lock cylinder preventing water intrusion.

Color: Black Housing, Chrome "T" Handle
Type: Locking Latch with 2 Keys
Mounting Hole: 2-1/2"
Faceplate: 3" diameter
Cam Bar: XL Offset 1/2" - 3"

SKU: 9-1091DP4BLK.…

Manufacturer
Perko
Model
9-1091DP4BLK
T Handle Vacuum Gauge Kit Racor RK111669

Racor RK111669 T Handle Vacuum Gauge Kit

Racor T-Handle Kit Includes silicone dampened gauge (11-1676) 0-30 inHG., lid fitting (11-1668) and O-ring (11350).

Replaces original 'T' handle

Vacuum Gauge for 900 & 1000 Turbine Series…

Manufacturer
Racor/Parker
Model
62-RK111669
T-Bag T-Top Storage Pack Holds 4 PFD's (Black)

T-Bag T-Top Storage Pack Holds 4 PFD's (Black)

Specially designed storage pack that easily mounts to all T-Tops & many pontoon tops.
Designed to hold Type II life jackets & other gear.
Main compartment has nylon zipper for easy access to life jackets.
(2) zippered compartments & 3 mesh pockets.
Stretch cord zigzags across bottom for easy access to towels, rain gear or other items.
Manufactured from durable 600-denier UV, water & mold resistant polyester pack cloth.

Size: 20"D x 25"W x 6"H
Holds: 4 PFD's Not Supplied

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Kwik Tek
Model
PFD-T4
T-Bag T-Top Storage Pack Holds 6 PFD's Black

T-Bag T-Top Storage Pack Holds 6 PFD's Black

Specially designed storage packs.
Easily mounts to all T-Tops & many pontoon tops.
Designed to hold Type II life jackets & other gear.
Main compartment has nylon zipper for easy access to life jackets.
2 zippered compartments & 3 mesh pockets.
Stretch cord zigzags across bottom for easy access to towels, rain gear or other items.
Manufactured from durable 600-denier UV, water & mold resistant polyester pack cloth.

Size: 20"D x 37"W x 6"H
Holds: 6 PFD's Not Supplied

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Kwik Tek
Model
PFD-T6
T-Bolt Clamp Jacket 1/" Caps  25-Bag PYI

T-Bolt Clamp Jacket 1/" Caps 25-Bag PYI

Put an end to exposed hose clamp tails, protects users from cuts and scrapes caused by the sharp ends of hose clamps.
Made out of durable EPDM rubber, the unique sleeve design allows the Clamp Jacket to slip over the tail of a worm gear hose clamp to provide a worker protection from cuts and abrasion from exposed clamp tails.
The Clamp Jacket is ideal for a multitude of projects including marine, automotive, industrial, military and even around the house.
Used by the US Coast Guard
Temperature range of -65° F to +300° F
Material durometer of 70+ / -5 (Shore A)
Tensile strength of 14.3 MPa

Size: 1/4"
Color: Black
Packaged: 25-per bag

SKU: 730-CJT1425.…

Manufacturer
PYI Inc.
Model
730-CJT1425
T-Bolt Clamp Jacket 1/" Caps 100-Bag PYI

T-Bolt Clamp Jacket 1/" Caps 100-Bag PYI

Put an end to exposed hose clamp tails, protects users from cuts and scrapes caused by the sharp ends of hose clamps.
Made out of durable EPDM rubber, the unique sleeve design allows the Clamp Jacket to slip over the tail of a worm gear hose clamp to provide a worker protection from cuts and abrasion from exposed clamp tails.
The Clamp Jacket is ideal for a multitude of projects including marine, automotive, industrial, military and even around the house.
Used by the US Coast Guard
Temperature range of -65° F to +300° F
Material durometer of 70+ / -5 (Shore A)
Tensile strength of 14.3 MPa

Size: 1/4"
Color: Black
Packaged: 100-per bag

SKU: 730-CJT14100.…

Manufacturer
PYI Inc.
Model
730-CJT14100
T-Greaser Multi-Purpose Cleaner Trac Ecological 1226MS 32 oz.

T-Greaser Multi-Purpose Cleaner 32 oz. 1226MS

Trac Ecological T-Greaser is a Multi-purpose, pleasant smelling, concentrated cleaner and degreaser.
Solvent free, antibacterial, formulated to be safe, non-toxic, non-corrosive and 100% biodegradable.
Spray it on and watch the toughest stains dissolve - no residue.

Size: 32oz.

1226MS, 202-1226MS.…

Manufacturer
Trac Outdoor Products
Model
202-1226MS
T-Handle Flush Latch Ajustable Cam S/Steel Sea-Dog 221942

T-Handle Flush Latch Ajustable Cam S/Steel Sea-Dog 221942

Sea-Dog lift & turn flush mount latch features an adjustable cam feature to fix a variety of cabinets.
Off set arm can adjust with set screw setting and also can be reversed for deeper cabinets.

Investment cast 316 stainless steel construction

Size: 2-3/8" OD.
3-3/4" from face to cam shaft
Hole size: 2".…

Manufacturer
Sea-Dog
Model
354-221942
T-Handle Latch Flexible 4.81"L Black 7-2255

T-Handle Latch Flexible 4.81"L Black 7-2255

Marpac flexible T-Handle features Non-corrosive, non-conductive, UV resistant materials.
Compensates for misalignment in 3 planes.
Built-in drag keeps latch stationary when unlatched.
Length 4.81”
Color: Black

SKU: 7-2255.…

Manufacturer
Marpac
Model
7-2255
T-Handle O-Ring 500/900/1000 Series RK11350

T-Handle O-Ring 500/900/1000 Series RK11350

Racor replacement T-Handle O-Ring fits 500, 900 and 1000 series filter separators.
Sold: Each

SKU: RK11350.…

Manufacturer
Racor/Parker
Model
RK11350
T-Top Universal Center Console Cover Acrylic Blue

T-Top Universal Center Console Cover Acrylic Blue

This trailerable T-Top Console cover is secured to the underside of the fixed T-Top Structure and will enclose any size console, helm seat and T-Top support combination with a maximum base perimeter (at the dock) of 18' or less.

Console cover measures 48" wide x 60" long x 66" high.

Adjustable straps allow the cover to conform to most console configurations.
Boats with smaller consoles and T-Tops can also cover and protect the helm seats.
Heavy duty marine grade zipper allows easy installation and removal.…

Manufacturer
Taylor Made Products
Model
32-67852OB
T-Top Universal Center Console Cover Acrylic Grey

T-Top Universal Center Console Cover Acrylic Grey

This trailerable T-Top Console cover is secured to the underside of the fixed T-Top Structure and will enclose any size console, helm seat and T-Top support combination with a maximum base perimeter (at the dock) of 18' or less.

Console cover measures 48" wide x 60" long x 66" high.

Adjustable straps allow the cover to conform to most console configurations.
Boats with smaller consoles and T-Tops can also cover and protect the helm seats.
Heavy duty marine grade zipper allows easy installation and removal.

Color: Grey…

Manufacturer
Taylor Made Products
Model
32-67852OG
Table Adjustable Pedestal 14-1/2" - 30-3/4" Garelick

Table Adjustable Pedestal 14-1/2" - 30-3/4" Garelick

The Garelick 75025 Converts dinettes to berths.
Ajusts to any position from 14-1/2" to 30-3/4".
Precision smooth stanchion tubing 2-7/8" diameter is pressed securely to 9" diameter cast aluminum base on each end.
In lower position, inside tube goes below deck 6".
Castings have six 1/4" holes for mounting.

Construction: Aluminum
Height: 14-1/2" to 29-1/2"…

Manufacturer
Garelick
Model
3-75025
Table Angled Removable Fastener C/P Brass Perko 0719DP0CHR

Table Angled Removable Fastener C/P Brass Perko

Chrome plated brass with black plastic knob.

Size: 1"W
Angle Length: 1-3/8"
Fastener: #8

Spare Knob order #9-071900099A
PN#0719DP0CHR…

Manufacturer
Perko
Model
9-0719DP0CHR
Table Angled Removable Fastener Spare Knob Only Perko 071900099A

Table Angled Removable Fastener Spare Knob Only

Table Angled Removable Fastener Spare Knob Only Perko 071900099A.
For Perko 0719DP0CHR…

Manufacturer
Perko
Model
9-071900099A
Table Brackets 2-3/4" x 1-11/16" C/Plated Brass 0148DP0CHR

Table Brackets 2-3/4" x 1-11/16" C/Plated Brass 0148DP0CHR
Perko table brackets are for removable tables

Bracket: 2-3/4" x 1-11/16"
Wall Plate: 3-3/8" x 2"
Fastener: #10

SKU: 9-0148DP0CHR

WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…

Manufacturer
Perko
Model
9-0148DP0CHR
Table Brackets 304 Stainless Steel Set 221320-1

Table Brackets 304 Stainless Steel Set 221320-1

Sea-Dog table brackets are constructed from stamped 304 stainless steel.
One set includes two wall brackets and two table brackets.

Wall Bracket Size: 2-1/8"H x 3-3/8"W
Table Bracket Size: 2-3/4"H x 1-3/4"W

SKU: 354-2213201.…

Manufacturer
Sea-Dog
Model
354-2213201
Table Brackets 90-Degree Angle 1-pr. Seachoice 37551

Table Brackets 90-Degree Angle 1-pr. Seachoice 37551

Seachoice quality marine products is dedicated to service and quality at an affordable price.
Seachoice Table Brackets 90 degree angle are Highly polished 304 Stainless Steel.

Size: 2-3/8" x 1/2"
Fastener: #8
Packaged: 2 per card

SKU: 37551, 50-37551.…

Manufacturer
Seachoice
Model
50-37551
Table Leg 2" x 26" Polished Stainless Steel 121122

Table Leg 2" x 26" Polished Stainless Steel Detmar

Detmar polished 2" x 26" table leg is made of corrosion resistant 304 stainless steel

Description: Table Leg
Size: 2" x 26"
Material: 304 stainless steel.…

Manufacturer
DetMar
Model
89-121122
Table Pedestal Kit 30"H, 2-7/8"D Garelick

Table Pedestal Kit 30"H, 2-7/8"D Garelick

Garelick EEz-in 30"H Table Pedestal Complete 3-Piece Set For Larger Boats
Fluted profile stanchion with protective anodized finish

Set includes:
Surface mount base
Pedestal and flush mount base
Quick stowage
9-1/4" Anodized aluminum base

Height: 30"
Post: 2-7/8".…

Manufacturer
Garelick
Model
3-75350
Table Receptacle 6-1/2"D Molded Plastic Surface Mount

Table Receptacle 6-1/2"D Molded Plastic Surface Mount

Molded of black high-impact plastic.
Mounts flush to underside of table or to floor.

Base: 6-1/2" diameter.
Construction: High Impact plastic
Accepts #10 x 1" pan head screws.…

Manufacturer
DetMar
Model
89-121131
Table Receptacle 6-5/8"D Flush Mount Detmar

Table Receptacle 6-5/8"D Flush Mount Detmar

Detmar table receptacle is constructed of Molded of black high-impact plastic.
Mounts flush to floor.
Base: 6-5/8" dia. with 1-5/8" recess.
Hole for table leg has molded-in plug to eliminate cap hole when leg is not in place.

Accepts #10 x 1-1/4" oval head SM screws
Color: Black.…

Manufacturer
DetMar
Model
89-121127
Table Top Clear Epoxy System Kit (Gallon) 6-7531

Table Top Clear Epoxy System Kit (Gallon) 6-7531

Use the Marpac Table Top Epoxy Kit on bar tops, tabletops, plaques, etc.
Dries to a high gloss finish.

Mix ratio is 1 part hardener to 1 part resin combined to make one gallon.

Description: Table Top Clear Epoxy Gallon Kit

SKU: 6-7531.…

Manufacturer
Marpac
Model
6-7531
Table Top Clear Epoxy System Kit (Quart) 6-7530

Table Top Clear Epoxy System Kit (Quart) 6-7530

Use the Marpac Table Top Epoxy Kit on bar tops, tabletops, plaques, etc.
Dries to a high gloss finish.

Mix ratio is 1 part hardener to 1 part resin combined to make one quart.

Description: Table Top Clear Expoxy Quart Kit

SKU: 6-7530.…

Manufacturer
Marpac
Model
6-7530
Table Top Clear Epoxy System Kit (Quart) 701340

Table Top Clear Epoxy System Kit (Quart) 701340

Use the Hi-Bond Table Top Epoxy Kit on bar tops, tabletops, plaques, etc.
Dries to a high gloss finish.

Mix ratio is 1 part hardener to 1 part resin combined to make one quart.

SKU: 701340, 349-701340.
Manufacturer: Hi-Bond

SKU: 701340.…

Manufacturer
Hi-Bond
Model
701340
Table Top Mount Thread Lock Springfield 1660704-L

SPRINGFIELD THREAD LOCK TABLE COMPONENTS - TABLE MOUNT ONLY 1660704-L: Uni-Lock Table Mount: High strength black plastic. 7'' diameter w/5-3/4'' hole pattern. Works w/any 2-3/8'' Uni-Lock table post.…

Manufacturer
Springfield
Model
1660704-L
Tachometer Wiring Harness Mercury Teleflex IH5105

Teleflex IH5105 Tachometer Wiring Harness Mercury

Teleflex wiring harness for tachometerf or Mercury 5-wire connection.…

Manufacturer
Seastar Solutions
Model
1-IH15105
Tachometer Wiring Harness OMC Teleflex IH14767

Teleflex IH14767 Tachometer Wiring Harness OMC

Teleflex wiring harness for tachometerf or OMC (Johnson/Evinrude) 3-wire plug connection.…

Manufacturer
Seastar Solutions
Model
1-IH14767
Tack Cloth 18" x 36" 1-pk, Bag

Tack Cloth 18" x 36" 1-pk, Bag

Seachoice Tack Cloth - Sticky cloth helps to remove loose sanding dust & trash from surfaces before painting
100% cotton
Ideal for painting, varnishing and staining
Removes dust and fine particles between finishing coats
Contains no waxes or silicone's

Size: 18" x 36"
Sold: Each…

Manufacturer
Seachoice
Model
50-90027
Tackle / Boat Storage / Trash Can Assembly TB-1

Deep Blue TB-1 Tackle / Boat Storage / Trash Can Assembly

Deep Blue's flush mount tilt out trash can holder is designed to be easy to mount and easy to use.

Simply tilt out the door and it closes itself when done.

Fits a Rubbermaid standard size plastic office trash can (included) which is easily removable for cleaning.

100% marine-grade poly (Starboard) construction for a lifetime of use.

All stainless mounting hardware is included.

Overall outside dimensions: 18" wide x 21-3/8" tall x 10" deep.

Can measures 13-1/2" x 9" x 15" tall.…

Manufacturer
Deep Blue Marine
Model
TB-1
Tackle / Boat Storage / Under Seat Tackle Box TS-3010

Tackle / Boat Storage / Under Seat Tackle Box TS-3010

The Deep Blue TS-3010 tackle / Storage box was designed to fit under many of todays aluminum leaning posts or under seat locations

The TS-3010 holds (3) Plano 3740's (9" x 14" x 2") and (1) Plano 3741 (9" x 14" x 3") and has a convenient drawer which has inside storage dimensions of 12-1/2" x 8" x 5" deep.

As all Deep Blue Marine products are built from 100% Marine-Grade Polymer Construction and use 316 stainless steel hinges and latches for a lifetime of use on the water.

Available with locking or non locking latches.

Plano boxes are not included but are available if needed and may be ordered separately

Size: 30" x 10" x 11"
Holes Size: 29-1/4" x 9-1/4" x 10-1/4"

SKU: TS-3010.…

Manufacturer
Deep Blue Marine
Model
TS-3010
Tackle Open Storage Box Deep Blue Marine TK-1

Tackle Open Storage Box Deep Blue Marine TK-1

This open storage box has several advantages over some others.
The door can open left or right by rotating the box 180 degrees.

Constructed of 100% marine-grade polymer for a lifetime of use and includes Deep Blue's Exclusive Stainless Steel "No Screwhead " Hinges and Slam Latch is standard with a locking latch as an option.

Lifetime Warranty

Dimensions:
Cut Out: 10-1/4" wide x 12-7/8" tall x 15"D
Overall: 12-5/16" wide x 15-1/4" tall x 14-1/2" deep
Color: White

NOTE:
Pictured Left TK-1
Pictured Right: Optional TK-5.

SKU: TK-1.…

Manufacturer
Deep Blue Marine
Model
TK-1
Tackle Open Storage Box Deep Blue Marine TK-2

Deep Blue Marine TK-2 Tackle Open Storage Box

This tackle storage box has several advantages over some others.
The door can open left or right by rotating the box 180 degrees.

The TK-2 is also available to hold 5 plano boxes or simply as an open storage box for any number of small items.

Constructed of 100% marine-grade polymer for a lifetime of use and also includes Deep Blue's exclusive no-screw-seen stainless hinges and Slam Latch is standard with a locking latch as an option.

Another option is a locking latch if desired.

Use your own Plano boxes or order some new waterproof boxes if needed.

Lifetime Warranty

Dimensions: Cut out: 11-5/8" wide x 12" tall
Overall: 13" wide x 13-5/8" tall x 8-1/2" deep.…

Manufacturer
Deep Blue Marine
Model
TK-2
Tackle Storage 1-Drawer  6"H x 13-1/2"W x 12"D DRW-1

Tackle Storage 1-Drawer 6"H x 13-1/2"W x 12"D DRW-1

This single drawer assembly will add valuable storage space and big boat style to your boat quickly and easily.

All hardware is stainless steel and features Deep Blue hinges with screwless design, no mounting screws can be seen from outside for a clean appearance.

The stainless D-ring latch is available in locking or non locking.

Constructed of 100% marine-grade polymer and has a lifetime warranty.

Easily mounts in your boat with supplied hardware.

Available in black or white.

Overall size; 13 1/2" wide x 6" tall x 12" deep.
Cut out size: 11-7/8" wide x 4-1/4" tall x 12" deep.

All mounting hardware is included.

"Measure Twice, Order Once"

SKU: DRW-1.…

Manufacturer
Deep Blue Marine
Model
DRW-1
Tackle Storage 2-Drawer  9-1/2"H x 13-1/2"W x 9"D DRW-2

Tackle Storage 2-Drawer 9-1/2"H x 13-1/2"W x 9"D DRW-2

This double drawer assembly will add valuable storage space and big boat style to your boat quickly and easily.

All hardware is stainless steel and features Deep Blue hinges with screwless design, no mounting screws can be seen from outside for a clean appearance.

The stainless D-ring latch is available in locking or non locking.

Constructed of 100% marine-grade polymer and has a lifetime warranty.

Easily mounts in your boat with supplied hardware.

Available in black or white

Overall size; 13 1/2" wide x 9 1/2" tall x 9" deep.
Cut out size: 12" wide x 8 1/4" tall x 9" deep.
Drawer size: 8 5/8" long x 7 1/4" wide x 2 1/4" tall

All mounting hardware is included.

SKU: DRW-2…

Manufacturer
Deep Blue Marine
Model
DRW-2
Tackle Storage 2-Drawer 14"H x 19"W x 13-3/8"D DRW-2M

Tackle Storage 2-Drawer 14"H x 19"W x 13-3/8"D DRW-2M

The new DRW-2M was designed due to the many requests we get for large storage options.
4" deep drawers accomodate many items needed for fishing and boating and is easily mounted in a 17-1/4" x 12-1/4" opening.

All hardware is stainless steel and features Deep Blue hinges with screwless design, no mounting screws can be seen from outside for a clean appearance.

The stainless D-ring latch is available in locking or non locking.

Constructed of 100% marine-grade polymer and has a lifetime warranty.

Easily mounts in your boat with supplied hardware.

Overall size: 19" wide x 14" tall x 13-3/8" deep.
Cut out size: 17-1/4" x 12-1/4"
Drawer size: 14-½” x 12” x 4” deep

Note: Note:
This drawer set must be supported in rear due to large size and ability to put heavy items inside and may be supported from bottom or top to take load from boat mounting surface and drawer mounting flange.

SKU: DRW-2M.…

Manufacturer
Deep Blue Marine
Model
DRW-2M
Tackle Storage 2-Drawer 14"H x 8"W x 6"D DRW-814

Tackle Storage 2-Drawer 14"H x 8"W x 6"D DRW-814

This small size double drawer set is designed for that area where you need some storage but do not have much room.

Two drawers hold items like phones, sunscreen, tackle, and other small items.

Locking latches (Keyed Alike) is optional

Overview:
Stainless Latches
100% Marine-Grade Construction
Stainless Mounting Screws Included
Lifetime Warranty

Overall dimensions; 8" wide x 14" tall x 6" deep
Cut out; 6 1/2" x 12 1/2"
Drawer size; 5" x 3 1/4" x 3 3/4" deep (x 2)

"Measure Twice, Order Once"

SKU: DRW-814, DRW814.…

Manufacturer
Deep Blue Marine
Model
DRW-814
Tackle Storage 3-Drawer 20"H x 12"W x 10"D DRW-3

Tackle Storage 3-Drawer 20"H x 12"W x 10"D DRW-3

This triple drawer set is perfect for tackle, tools, and general boat storage.
Includes stainless latches as standard equipment.
100% Starboard construction, don't settle for PVC parts in your boat.

Overall size; 20" x 12" x 10" deep, cut out size; 18 1/2" x 10 1/2", drawers are approx. 9" x 7", bottom drawer is 4 3/4" deep and upper drawers are 3 1/4" deep.
Locking Latch Option
Locking latch option is for all 3 latches, all will be keyed alike
Available in black or white

Features:
Triple Drawer Set Is Ideal For Storage
Utilize Unused Space In Your Boat
Stainless Latches Standard
Poly Slides For Smooth Operation
Locking Latch Option Available
Available in black or white
Lifetime Warranty.…

Manufacturer
Deep Blue Marine
Model
DRW-3
Tackle Storage 3-Drawer Large Bottom 20"W x 22.25"T x 14"D

Tackle Storage 3-Drawer Large Bottom 20"W x 22.25"T x 14"D

Deep Blue triple drawer set adds versatility and more storage options to your boat.
100% Starboard Construction, no PVC filler parts.
Stainless latches are standard.
Size; Overall size is: 20 wide x 22.25 tall x 14 deep.
Cut out size is: 18.5 wide x 20.75 tall Drawer depth from (top to bottom) 4", 4", 5.5"
Features:
Larger Triple Drawer Set
Large Bottom Drawer For Versatility
100% Starboard Construction
Poly Slide For Smooth Operation
Lifetime Warranty
Locking latch option add separately, includes (3) latches, 6 keys, keyed alike.…

Manufacturer
Deep Blue Marine
Model
DRW3.3
Tackle Storage 6-Drawer 26"H x 16"W x 15-1/2"D DRW-6

Tackle Storage 6-Drawer 26"H x 16"W x 15-1/2"D DRW-6

The DRW-6 is a direct replacement for most small refrigerators

We have designed it to have versatile storage options by making six drawers with three different size drawers.

Use it for tackle, tools, non refrigerated food, or whatever you want to store.

Constructed from 100% Marine-Grade material

316 Tamper Free Hinges & Latch

Available with locking or non locking latches

Lifetime Warranty

Overall size: 26" x 16" x 15-1/2" deep
Cut out sizes: 24" x 14-1/2" x 15-1/2" deep
Drawers are all 13" x 11" with depths of: 4- 1/2", 3-1/2" and 2"

"Measure Twice, Order Once".…

Manufacturer
Deep Blue Marine
Model
DRW-6
Tackle Storage 7-Multi-Drawer 30"H x 21-3/4"W x 17"D DRW-7

Tackle Storage 7-Multi-Drawer 30"H x 21-3/4"W x 17"D DRW-7

The NEW DRW-7 is ideal for storing most all of your boating/tackle items.

With seven drawers for maximum versatility this unit is designed to give you the option of storing many of your most used products.

Deep enough to hold Plano 9" x 14" boxes in 2" and 3" depth and are available if needed.

All hardware is stainless steel and features Deep Blue hinges with screwless design, no mounting screws can be seen from outside for a clean appearance.

The stainless D-ring latch is available in locking or non locking.

Constructed of 100% marine-grade polymer and has a lifetime warranty.

Cabinet dimensions:
Overall 30"H x 21-3/4"W x 17" deep.
Cut out: 28-1/4" x 20".
Large drawers are approx. 17" wide x 14" deep x 6-1/2" tall.
Mid drawer is 17" wide x 14" deep x 3-3/8" tall.
Small drawers are 7-1/2" wide x 14" deep x 3-3/8" tall

"Measure Twice, Order Once"…

Manufacturer
Deep Blue Marine
Model
DRW-7
Tackle Storage Box 2-Tray  7" x 14" (White)

Tackle Storage Box 2-Tray 7" x 14" (White)

T-H Marine Designer Series Tackle Tray Box Arranges and Stores Your Tackle and Valuables
Vacuum Formed and Divided Poly Box provide separated compartments that hold Plano style plastic tackle trays
Comes with 2 Plano 3600 Trays
Securely Attached to Our Best Designer Series™ Hatch Lid

Size: 7" x 14"
Trays: 2
Color: Polar White.…

Manufacturer
T-H Marine
Model
TDS-0714-2T-2P
Tackle Storage Box 3-Tray 11"H x 15"W x 9"D

Tackle Storage Box 3-Tray 11"H x 15"W x 9"D
In 2008 DPI Marine, Inc. bought out the Daytona Plastix access hatch, deck lid and tackle center lines and continue to produce them today.
DPI Marine, Inc (formerly Daytona Plastix) is a leading provider of marine plastic accessory products and also offers custom injection molding services.
4-Tray Tackle/Med Kit Storage Box is an effective storage to optimize deck space
Features:
3 Medium, storage trays (10-5/8" x 6-5/8" x 1-9/16")
UPGRADED 316 stainless steel hinge (best resistance to corrosion in salt water)
Available in 3 colors, Polar White (Bright White), Marine White (Creamy White) and Black!
Add Key Locking option to your Tackle Center (keep your gear safe and secure while you are away from your boat)

Description: 3 Tray Tackle/Med Kit Storage Box
Outside Frame: 11" x 15
Cutout: 9-3/4" x 13-1/2"

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
DPI Marine
Model
DPTC1115
Tackle Storage Box 3-Tray 11"H x 15"W x 9"D White Designer

Tackle Storage Box 3-Tray 11"H x 15"W x 9"D White

T-H Marine Designer Series Tackle Tray Box Arranges and Stores Your Tackle and Valuables
Vacuum Formed and Divided Poly Box provide separated compartments that hold Plano style plastic tackle trays.
Securely Attached to Our Best Designer Series™ Hatch Lid

Size: 11"H x 15"W x 9"D
Trays: 3
Color: Polar White
Series: Designer SeriesMBR

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
T-H Marine
Model
TDS-1115-3T-2P
Result Pages:
Manufacturers