Result Pages:
G Series Fender  5-1/2" x 20" (Black) Polyform

G Series Fender 5-1/2" x 20" (Black) Polyform

Polyform G-Series fender is Molded out of tough commercial strength marine vinyl in one piece to give years of service.
The valve system allows you to adjust firmness to suit the application.

Boat size: 15-25'
Size: 5-1/2" x 20"
Color: Black.…

Manufacturer
Polyform
Model
218-G3BLK
G Series Fender  5-1/2" x 20" (White) Polyform G3W

G Series Fender 5-1/2" x 20" (White) Polyform G3W

Polyform G-Series fender is Molded out of tough commercial strength marine vinyl in one piece to give years of service.
The valve system allows you to adjust firmness to suit the application.

Boat size: 15-25'
Size: 5-1/2" x 20"
Color: White


SKU: G3W, 218-G3W.…

Manufacturer
Polyform
Model
218-G3W
G-Force 3 Inflatable Boat Towable Ski Tube AHGF-3

G-Force 3 Inflatable Boat Towable Ski Tube AHGF-3

G-FORCE is a wild ride for up to 3 thrill-seekers!
Defy centrifugal force with this towable's topside stabilizer fins.
The 6 deluxe nylon-wrapped handles with neoprene knuckle guards provide a sure and comfortable grip.

G-FORCE has a tough 30-gauge virgin PVC bladder, fully covered with an 840-denier double-stitched nylon cover.
It is equipped with a heavy-duty Kwik-Connect for easy and secure tow rope hook-ups.

Size: 72" W x 72" L.
Riders: 1 to 3 riders

Enjoy your Water Toy and before you use please read "WaterSports Safety Code" Found on our Home Page Category under (Product Help)



⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Kwik Tek
Model
AHGF-3
G-Force Eliminator Prop Nut Minn Kota 35 - 70 (Black)

G-Force Eliminator Prop Nut Minn Kota 35 - 70 (Black)

The ELIMINATOR™ Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR™ Prop Nut stabilizes the prop by providing a larger contact point.
In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Minn Kota nut available in two sizes - one for 80lb thrust and above, one for below 80lb thrust.
GFEL-MK- models fit Minn Kota 80,101 and 112 models.
GFEL-MKS- models fit Minn Kota 30 thru 75.

Make sure that you're getting the most out of your trolling motor with the the ELIMINATOR™ Prop Nut.

Please Note:
Will not work with Kipawa and Hydrilla Hacker Props.

Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Visually appealing
Designed and made in the U.S.A.
Patent pending.

Fits: Minn Kota
Color: Black

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
T-H Marine
Model
GFEL-MKS-BK-DP
G-Force Eliminator Prop Nut Minn Kota 35 - 70 (Blue)

G-Force Eliminator Prop Nut Minn Kota 35 - 70 (Blue)

The ELIMINATOR™ Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR™ Prop Nut stabilizes the prop by providing a larger contact point.
In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Minn Kota nut available in two sizes - one for 80lb thrust and above, one for below 80lb thrust.
GFEL-MK- models fit Minn Kota 80,101 and 112 models.
GFEL-MKS- models fit Minn Kota 30 thru 75.

Make sure that you're getting the most out of your trolling motor with the the ELIMINATOR™ Prop Nut.

Please Note:
Will not work with Kipawa and Hydrilla Hacker Props.

Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Visually appealing
Designed and made in the U.S.A.
Patent pending.

Fits: Minn Kota
Color: Blue

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
T-H Marine
Model
GFEL-MKS-BU-DP
G-Force Eliminator Prop Nut Minn Kota 80, 101, 112 (Blue)

G-Force Eliminator Prop Nut Minn Kota 80, 101, 112 (Blue)

The ELIMINATOR™ Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR™ Prop Nut stabilizes the prop by providing a larger contact point.
In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Minn Kota nut available in two sizes - one for 80lb thrust and above, one for below 80lb thrust.
GFEL-MK- models fit Minn Kota 80,101 and 112 models.
GFEL-MKS- models fit Minn Kota 30 thru 75.

Make sure that you're getting the most out of your trolling motor with the the ELIMINATOR™ Prop Nut.

Please Note:
Will not work with Kipawa and Hydrilla Hacker Props.

Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Visually appealing
Designed and made in the U.S.A.
Patent pending.

Fits: Minn Kota 80, 101, 112
Color: Blue

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
T-H Marine
Model
GFEL-MK-BU-DP
G-Force Eliminator Prop Nut Motorguide (Black)

G-Force Eliminator Prop Nut Motorguide (Black)

The ELIMINATOR™ Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR™ Prop Nut stabilizes the prop by providing a larger contact point.
In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and Motorguide trolling motors.

Make sure that you're getting the most out of your trolling motor with the the ELIMINATOR™ Prop Nut.

Please Note:
Will not work with Kipawa and Hydrilla Hacker Props.

Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Visually appealing
Designed and made in the U.S.A.
Patent pending.

Fits: Motorguide
Color: Black

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
T-H Marine
Model
GFEL-MG-BK-DP
G-Force Eliminator Prop Nut Motorguide (Blue)

G-Force Eliminator Prop Nut Motorguide (Blue)

The ELIMINATOR™ Prop Nut is built to make your trolling motor perform better, longer, and quieter.

Designed to lessen prop noise and vibration, The ELIMINATOR™ Prop Nut stabilizes the prop by providing a larger contact point.
In addition, it acts as a heat sink and has built-in cooling ports that reduce the operating temperature for longer battery and trolling motor life.

Made to fit most Minn Kota and Motorguide trolling motors.

Make sure that you're getting the most out of your trolling motor with the the ELIMINATOR™ Prop Nut.

Please Note:
Will not work with Kipawa and Hydrilla Hacker Props.

Key Eliminator Benefits:
Machined from 6061 Billet Aluminum
O-ring dampens noise/vibration and secures nut
Wider contact area for a more stable prop
Cooling ports aid in heat dissipation
Anodized protected
No tools needed
Visually appealing
Designed and made in the U.S.A.
Patent pending.

Fits: Motorguide
Color: Blue

SKU: GFEL-MG-BU-DP, 232-GFELMGBUDP.…

Manufacturer
T-H Marine
Model
GFEL-MG-BU-DP
G-Force Equailzer Trolling Motor Lift Assist (Black)

G-Force Equailzer Trolling Motor Lift Assist (Black)

Reduce the lifting weight of your trolling motor by as much as 50%.
The G-Force EQUALIZER™ trolling motor list assist system consists of two air pistons that attach to almost any Motorguide Gator Mount to provide effortless lifting in-and-out of the water.

Complete with easy-to-follow instructions, drilling template, and marine-grade hardware, the EQUALIZER™ is quick and straight forward to install.

A must-have for any Motorguide owner, the EQUALIZER™ is a great way to offset the added weight of StructureScans and Hydrowaves, so your time on the water is as comfortable as possible.

Kit Includes:
2X EQUALIZER™ Trolling Motor Assist Air Pistons
Drilling template
Marine-grade stainless steel hardware
Instructions
Picture of the mount and basic guidelines
Equalizer decal

Fits: Motorguide
Color: Black

SKU: GFEQ-MG-BK-DP, 232-GFEQMGBKDP.…

Manufacturer
T-H Marine
Model
GFEQ-MG-BK-DP
G-Force Equailzer Trolling Motor Lift Assist (Blue)

G-Force Equailzer Trolling Motor Lift Assist (Blue)

Reduce the lifting weight of your trolling motor by as much as 50%.
The G-Force EQUALIZER™ trolling motor list assist system consists of two air pistons that attach to almost any Motorguide Gator Mount to provide effortless lifting in-and-out of the water.

Complete with easy-to-follow instructions, drilling template, and marine-grade hardware, the EQUALIZER™ is quick and straight forward to install.

A must-have for any Motorguide owner, the EQUALIZER™ is a great way to offset the added weight of StructureScans and Hydrowaves, so your time on the water is as comfortable as possible.

Kit Includes:
2X EQUALIZER™ Trolling Motor Assist Air Pistons
Drilling template
Marine-grade stainless steel hardware
Instructions
Picture of the mount and basic guidelines
Equalizer decal

Fits: Motorguide
Color: Blue

SKU: GFEQ-MG-BU-DP, 232-GFEQMGBUDP.…

Manufacturer
T-H Marine
Model
GFEQ-MG-BU-DP
G-Force Grass Goat Trolling Motor Weed Guard (Minn-Kota Large)

G-Force Grass Goat Trolling Motor Weed Guard (Minn-Kota Large)

NOTE: This product is not compatible with Minn Kota Edge motors
A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris.
Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time.
Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

Benifits:
Keeps your trolling motor clear of debris
Genuine Marine grade
Starboard Mounting Plate
Stainless Steel Cutting-Blade

Fits: Minn-Kota Large
Includes Fortrex 112, Ultrex 112, and Ultrex 80
NOTE: This product is not compatible with Minn Kota Edge motors

California P65 Law Warning: Some of the products on this website can expose you to chemicals including lead, which is known by the State of California to cause cancer and reproductive harm. For more information please go to www.P65Warnings.ca.gov.…

Manufacturer
T-H Marine
Model
GFGG-MKL-DP
G-Force Grass Goat Trolling Motor Weed Guard (Minn-Kota Small)

G-Force Grass Goat Trolling Motor Weed Guard (Minn-Kota Small)

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris.
Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time.
Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

Benifits:
Keeps your trolling motor clear of debris
Genuine Marine grade
Starboard Mounting Plate
Stainless Steel Cutting-Blade

Fits: Minn-Kota Small

SKU: GFGG-MKS-DP

California P65 Law Warning: Some of the products on this website can expose you to chemicals including lead, which is known by the State of California to cause cancer and reproductive harm. For more information please go to www.P65Warnings.ca.gov.…

Manufacturer
T-H Marine
Model
GFGG-MKS-DP
G-Force Grass Goat Trolling Motor Weed Guard (Motorguide)

G-Force Grass Goat Trolling Motor Weed Guard (Motorguide)

A must-have for anglers who spend a lot of time in heavily vegetated areas, the Grass Goat is an aftermarket cutting-tool for your trolling motor that slices through vegetation and keeps your trolling motor clear of debris.
Featuring a genuine marine grade starboard mounting plate, it also comes equipped with a 316 stainless steel cutting-blade to ensure years of use under the toughest conditions.

Incredibly easy to install, the Grass Goat comes with all of the necessary mounting hardware and easy-to-follow instructions that will have you fishing weedlessly in no time.
Don’t waste anymore time removing grass from your trolling motor when your fishing through your favorite honey hole, get the Grass Goat today.

Benifits:
Keeps your trolling motor clear of debris
Genuine Marine grade
Starboard Mounting Plate
Stainless Steel Cutting-Blade

Fits: Motorguide

SKU: GFGG-MG-DP

California P65 Law Warning: Some of the products on this website can expose you to chemicals including lead, which is known by the State of California to cause cancer and reproductive harm. For more information please go to www.P65Warnings.ca.gov.…

Manufacturer
T-H Marine
Model
GFGG-MG-DP
Gaff Brackets For 2" Gaff Hook GP2

Gaff Brackets For 2" Gaff Hook GP-2

Have kids?, pets? or just need a safe place to store your gaff?
The GP series Gaff Brackets are designed to keep the hook covered and shaft supported and fits most every gaff we tried it on.
Simple one hand in-out for quick removal by releasing the elastic strap on the shaft support.

Fits hook sizes of 2, 3, & 4 inch and shaft sizes up to 1" in diameter
Constructed of 100% marine-grade polymer.
Lifetime Warranty

Size: 2" Gaff Hook

SKU: GP-2…

Manufacturer
Deep Blue Marine
Model
GP-2
Gaff Brackets For 3" Gaff Hook GP3

Gaff Brackets For 3" Gaff Hook GP-3

Have kids?, pets? or just need a safe place to store your gaff?
The GP series Gaff Brackets are designed to keep the hook covered and shaft supported and fits most every gaff we tried it on.
Simple one hand in-out for quick removal by releasing the elastic strap on the shaft support.

Fits hook sizes of 2, 3, & 4 inch and shaft sizes up to 1" in dia.
Constructed of 100% marine-grade polymer.
Lifetime Warranty

Size: 3" Gaff Hook

SKU: GP-3…

Manufacturer
Deep Blue Marine
Model
GP-3
Gaff Brackets For 4" Gaff Hook GP-4

Gaff Brackets For 4" Gaff Hook GP-4

Have kids?, pets? or just need a safe place to store your gaff?
The GP series Gaff Brackets are designed to keep the hook covered and shaft supported and fits most every gaff we tried it on.
Simple one hand in-out for quick removal by releasing the elastic strap on the shaft support.

Fits hook sizes of 2, 3, & 4 inch and shaft sizes up to 1" in diameter
Constructed of 100% marine-grade polymer
Lifetime Warranty

Size: 4" Gaff Hook

SKU: GP-4…

Manufacturer
Deep Blue Marine
Model
GP-4
Galley Basin Mixer High Profile Scandvik 10422

Galley Basin Mixer High Profile Scandvik 10422

Scandvik Hot & Cold Water Galley Mixer with Swiveling, high profile spout (used in galley areas)
Matches Scandvik item 390-10050

Construction: Chrome-plated brass
Thread type: 1/2" Female NPT
Mounting hole: 1"

SKU: 390-10422.…

Manufacturer
Scandvik
Model
390-10422
Galley Mixer Faucet High-Reach Swivel Spout Scandvik 10438

Galley Mixer Faucet High-Reach Swivel Spout Scandvik 10438P

Scandvik Chrome plated brass galley mixer with high reach, swivel J spout
Flexible supply lines with 1/2" NPS female fitting.

3/8 male BSP thread and 1/2 male NPT adapter
Requires a 1 mounting hole.

Replaces: Scandvik 11438

SKU: 390-10438P…

Manufacturer
Scandvik
Model
390-10438P
Galley Mixer Single Lever Scandvik 10871

Galley Mixer Single Lever Scandvik 10871

Combines one handed operation and ceramic valves to guarantee a drip free faucet.
Features a pull out sprayer with a 5' chrome flex hose and a push button spray pattern adjustment located on sprayer handle.
Chrome plated brass.

3/8" male thread BSP and 1/2" male NPT.
Requires a 1-1/2" mounting hole.

SKU: 390-10871.…

Manufacturer
Scandvik
Model
390-10871
Galvanic Isolator Fail-Safe 30 Amps ProMariner 22034

ProMariner 22034 Galvanic Isolator Fail-Safe 30 Amps

ProMariner Failsafe galvanic isolators interrupt galvanic current with other boats in your marina when installed on a boat which is connected to shore power.

It maintains the safety ground and solves the most common forms of corrosion and premature zinc loss within a boat's bonding system by protecting your system from boats or marinas with improper wiring.

In the event of a failure, it maintains safety by not compromising the ground continuity onboard when you are connected to shore power.

Optional model 22074 features built in cooling if needed.

UL certified and ABYC A-28 compliant and fail safe certified.
Meets ISO 8846 for ignition protection for mounting within an engine compartment.

Shore cord inlet compatibility: Single 15 16 20 or 30
Voltage: 120/240.
Amps: 30A
Size: 6.75" L x 7" W x 2.5" H.…

Manufacturer
Pro Mariner
Model
175-22034
Galvanic Isolator Fail-Safe 60 Amps ProMariner 22074

ProMariner 22074 Galvanic Isolator Fail-Safe 60 Amps

ProMariner Failsafe galvanic isolators interrupt galvanic current with other boats in your marina when installed on a boat which is connected to shore power.

It maintains the safety ground and solves the most common forms of corrosion and premature zinc loss within a boat's bonding system by protecting your system from boats or marinas with improper wiring.

In the event of a failure, it maintains safety by not compromising the ground continuity onboard when you are connected to shore power.

Optional model 22074 features built in cooling if needed.

UL certified and ABYC A-28 compliant and fail safe certified.
Meets ISO 8846 for ignition protection for mounting within an engine compartment.

Shore cord inlet compatibility: Single 50 or Dual 15's 16's 20's or 30's
Voltage: 120/240.
Amps: 60A
Size: 7.25" L x 6.5" W x 3.75" H.…

Manufacturer
Pro Mariner
Model
175-22074
Garboard Captive Drain Plug S/Steel Sea-Dog

Garboard Captive Drain Plug S/Steel Sea-Dog

Sea-Dog 316 stainless steel garboard drain and plug features Captive plug which means no more lost plug!
Investment Cast 316 Stainless construction.
Captive Garboard Drain & Plug is a direct replacement for the traditional style Sea-Dog Line bronze Garboards, Sea-Dog part numbers 520040 and 520042.

Description: Stainless Steel Garboard with Captive Drain Plug
Diameter: 2"
Hole Size: 1-1/8"
Length: (Closed) 2-5/8"
Fastener: #8 FH

SKU: 354-5200601

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Sea-Dog
Model
520060-1
Garboard Drain Plug Only (Brass) 12-pk Seachoice

Garboard Drain Plug Only Brass 12-pk Seachoice

Seachoice replacement garboard drain plug is constructed from brass.

Size: 1/2" IPT
Material: Brass
Packaged: 12 per pack

SKU: 50-18760

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18760
Garboard Drain Plug Only (Brass) Seachoice

Garboard Drain Plug Only Brass Seachoice

Seachoice replacement garboard drain plug is constructed from brass.

Size: 1/2" IPT
Construction: Brass

SKU: 50-18761

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18761
Garboard Drain Plug Only Chrome Plated Brass 1/2"

Garboard Drain Plug Only Chrome Plated Brass 1/2"

Seachoice replacement garboard drain plug is constructed from brass and is chrome plated.

Size: 1/2" IPT
Construction: Chrome Plated Brass

SKU: 50-18741

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18741
Garboard Drain Plug Only Stainless Steel 1/2"

Garboard Drain Plug Only Stainless Steel 1/2"

Seachoice replacement garboard drain plug is constructed from brass and is chrome plated.

Size: 1/2" IPT
Construction: Stainless Steel

SKU: 50-18721

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18721
Garboard Drain Plug Replacement Brass 1/2"

Garboard Drain Plug Replacement Brass 1/2"

Seachoice replacement garboard drain plug Fits 1/2" (1.27cm) pipe.
Brass plug fits Seachoice and many brands of garboard drains

Description: Replacement garboard drain plug
Material: Brass
Size: 1/2"

SKU: 50-18761

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18761
Garboard Drain Plug Spare Bronze Perko

Garboard Drain Plug Spare Bronze Perko

Perko spare garboard drain plug fits Perko series 0263, 0266, 0363 garboard drain plugs

Construction: Cast Bronze
Thread: 3/4" NPT

SKU: 9-0370DP0PLB

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Perko
Model
9-0370DP0PLB
Garboard Drain Plug Stainless Steel 7/8" Seachoice

Garboard Drain Plug Stainless Steel 7/8" Seachoice

Seachoice stainless steel drain plug features threaded removable plug.
Retention system keeps plug from getting lost.
High polished 316 stainless steel reduces corrosion.

Diameter: 7/8"
Guaranteed for life.

SKU: 50-18661

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18661
Garboard Drain w/Landyard Plug S/Steel GEM

Garboard Drain w/Landyard Stainless Steel GEM

GEM Garboard Drain with plug are made of 316 Stainless Steel.
They are machined on an CNC machine.
Supplied with an attached lanyard to reduce the chance of loosing your plug!

Material: Investment Cast Stainless Steel
Size: 2"
Height: 1.25"
Fastener: #10

SKU: 8700

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
GEMLUX Products
Model
87000
Garboard Drain w/Plug Brass Seachoice

Garboard Drain w/Plug Brass Seachoice

Seachoice drain plug features Cast bronze 2" outside flange.
Fits 1/2" (1.27cm) pipe.
Mounts with #8 screws.
Brass plug.

Construction: Cast Brass Flange and Plug

SKU: 50-18751

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Seachoice
Model
50-18751
Garboard Drain w/Plug Bronze Perko

Garboard Drain w/Plug Bronze Perko

Perko garboard drain with plug is constructed from Cast Bronze.
Flange outside diameter is 2"
Pipe size is 1/2"

Construction: Cast Bronze
Flange: 2"
Pipe Size: 2"
Spare plug 9-0742DP1

SKU: 9-

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Perko
Model
9-0714DP1PLB
Garboard Drain w/Plug Chrome Plated 1/2" Pipe

Garboard Drain w/Plug Chrome Plated 1/2" Pipe

Seachoice garboard drain and plug is constructed from chrome plated brass.

Description: Chrome plated brass flange with plug
Outside Diameter: 2
Fits 1/2" pipe.
Mounts with #8 screws.

SKU: 50-18731

WARNING: This product can expose you to chemicals including undefined …

Manufacturer
Seachoice
Model
50-18731
Garboard Drain w/Plug Stainless Steel Seachoice

Garboard Drain w/Plug Stainless Steel Seachoice

Seachoice garboard drain and plug is constructed from stainless steel
Outside Diameter 2"
Fits 1/2" pipe.
Mounts with #8 screws.

SKU: 50-18711…

Manufacturer
Seachoice
Model
50-18711
Garboard Drain w/T-Handle Plug Bronze Perko

Garboard Drain w/T-Handle Plug Bronze Perko

Perko garboard drain with T-Handle plug is constructed of cast bronze.

Flange: 2-3/8" OD
Pipe: 3/4"IPS
Thread: 5/8"L

SKU: 9-

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Perko
Model
9-0266DP0PLB
Garboard Wrench PlugMate Sea-Dog

Garboard Wrench Plug-Mate Sea-Dog

Sea-Dog Plug-Mate garboard wrench will fit most standard and "T" style garboard plugs.
In addition, the PlugMate has various deck plate keys and shackle key.
Includes replacement plug #354-520041

Size: 8-1/4"L
Hole: 9/16" diameter.

SKU: 354-5200451

WARNING: This product can expose you to chemicals including undefined by manufacturer, which is known to the State of California to cause cancer and reproductive harm. For more information, visit www.P65Warnings.ca.gov…

Manufacturer
Sea-Dog
Model
354-5200451
Garelick 2-7/8" Smooth Stanchion  4-3/4"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 4-3/4"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" diameter stanchion tube, 9" diameter 6 hole base plate.
One piece casting design for mounting seats as low to floor deck as possible.
Compatible with Garelick hardware.

Provides solid base of support for a variety of seat hardware.
Mounts Garelick fore and aft seat slides and 360-degrees swivel spider combinations.

Fore and aft seat slides:
#22000, #22001, #75080, #75081, #75082 & #75083

Swivel spiders:
#99023 and #99036
Anodized protective finish.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75404
Garelick 2-7/8" Smooth Stanchion  9"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 9"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" Stanchion tube with 9.25" diameter 6-hole base plate.
Provides solid base of support for a variety of seat hardware.
Anodized protective finish.
Mounts Garelick fore and aft seat slides and 360-degree swivel spider combinations.
Accepts seat slides: 22000, 75080, 75081, and 75083
Swivel spiders: 99023, and 99036

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75431
Garelick 2-7/8" Smooth Stanchion 12"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 12"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" Stanchion tube with 9.25" diameter 6-hole base plate.
Provides solid base of support for a variety of seat hardware.
Anodized protective finish.
Mounts Garelick fore and aft seat slides and 360-degree swivel spider combinations.
Accepts seat slides: 22000, 75080, 75081, and 75083
Swivel spiders: 99023, and 99036.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
3-75430
Garelick 2-7/8" Smooth Stanchion 15"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 15"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" Stanchion tube with 9.25" diameter 6-hole base plate.
Provides solid base of support for a variety of seat hardware.
Anodized protective finish.
Mounts Garelick fore and aft seat slides and 360-degree swivel spider combinations.
Accepts seat slides: 22000, 75080, 75081, and 75083
Swivel spiders: 99023, and 99036.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
3-75415
Garelick 2-7/8" Smooth Stanchion 18"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 18"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" Stanchion tube with 9.25" diameter 6-hole base plate.
Provides solid base of support for a variety of seat hardware.
Anodized protective finish.
Mounts Garelick fore and aft seat slides and 360-degree swivel spider combinations.

Accepts seat slides:
#22000, #75080, #75081 and #75083

Swivel spiders:
#99023 and #99036.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
3-75432
Garelick 2-7/8" Smooth Stanchion 24"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 24"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" Stanchion tube with 9.25" diameter 6-hole base plate.
Provides solid base of support for a variety of seat hardware.
Anodized protective finish.
Mounts Garelick fore and aft seat slides and 360-degree swivel spider combinations.

Accepts seat slides:
#22000, #75080, #75081 and #75083

Swivel spiders:
#99023 and #99036.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
3-75433
Garelick 2-7/8" Smooth Stanchion 30"H Seat Pedestal

Garelick 2-7/8" Smooth Stanchion 30"H Seat Pedestal

Garelick seat pedestals feature a 2-7/8" Stanchion tube with 9.25" diameter 6-hole base plate.
Provides solid base of support for a variety of seat hardware.
Anodized protective finish.
Mounts Garelick fore and aft seat slides and 360-degree swivel spider combinations.

Accepts seat slides:
#22000, #75080, #75081 and #75083

Swivel spiders:
#99023 and #99036.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75434
Garelick Adjustable Height Seat Base & Spider 12"-18"

Garelick Adjustable Height Seat Base & Spider 12"-18"

The Garelick adjustable height seat base & spider features a 2-7/8" diameter stanchion tube, 9" diameter base plate.
Locks at desired height.
4 prong spider swivels 360-degrees and locks.

Finish: Polished Aluminum
Weight: 7-1/4 lbs.
Adjustable: 12" to 18"Height

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75035
Garelick Detachable Aluminum Pedestal Plate 9"D

Garelick Detachable Aluminum Pedestal Plate 9"D

The Garelick Detachable Pedestal Plate mounts to deck surface for base attachment, allows base and seat to be removed.
9" diameter machined anodized aluminum - solid plate, 3 stainless cap screws, and allen wrench included.

Adapts to all models, simply enlarge 6 base holes to 7/16" diameter.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75056
Garelick Seat Slide Low Profile 5" Travel

Garelick Seat Slide Low Profile 5" Travel

Garelick low profile seat slide mounts under seat.
Convenient handle provides locking at any position.
Compatible with most 360° spiders (Not Included) or mounts directly to deck.
Wobble-free design/operation.
Anodized aluminum with stainless hardware.
Spider swivel casting not included.
Adds 1-5/8" to the height.

Application: Low Profile Seat Slide 5" Travel
Mounting: Deck Mount or Spider Mount
Travel: 5"
Size: 13"L x 8-1/2"W

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75091
Garelick Seat Slide Low Profile Full Size 7" Travel

Garelick Seat Slide Low Profile Full Size 7" Travel

Garlick low profile seat slide mounts under seat.
Full Length Size For Roto Molded Seat 7" Fore and Aft Travel
Convenient handle provides locking at any position.
Compatible with most 360° spiders.
Wobble-free design/operation.
Anodized aluminum with stainless hardware.
Spider swivel casting not included.
Adds 1-5/8" to the height.

Description: Low Profile Full Length Seat Slide.
Travel Application: Roto Molded Seats
Travel: 7"
Size: 13"L x 8-1/2"W.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75081
Garelick Seat Slide Standard 6" Travel

Garelick Seat Slide Standard 6" Travel

Garelick seat slide mounts under seat.
Convenient handle provides locking at any position.
Compatible with most 360° spiders.
Wobble-free design/operation.
Anodized aluminum with stainless hardware.
Spider swivel casting not included.
Adds 1-5/8" to the height.

Description: Low Profile Seat Slide, Standard Size
Application: Wood/Plastic Seats
Travel: 6"
Size: 8"L x 8-1/2"W.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75080
Garelick Seat Swivel Easy Mount Larger Bottom 75018

Garelick Seat Swivel Easy Mount Larger Bottom 75018

Garelick Easy Mount" Seat Swivel features Larger bottom half that exposes four mounting holes.
Rotates 360 degrees - fits most standard seat hole patterns
Self-lubricated, non-corrosive poly swivel bearings.

Description: Seat Swivel Larger Bottom
Size: 7" x 7"
Finish: Black

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Garelick
Model
75018
Garmin VHF 100 VHF Marine Radio Class D (Black)

Garmin VHF 100 VHF Marine Radio Class D (Black)

The Garmin VHF 100 has an intuitive design and provides radio communication for convenience and safety.

Communicate with Confidence
With up to 25 watts of transmit power at your fingertips, you’ll be able to stay in touch anywhere on the water. So no matter where you are or where you’re heading, you’ll always have a line of communication open to make sure every voyage is a safer voyage.

Safety First
The VHF 100 provides full Class D Digital Selective Calling (DSC) capability via NMEA 0183 interface.
Should trouble arise, DSC provides distress calls with the push of a button.
And if your boat is already interfaced with a compatible GPS chartplotter, you’ll get mayday signaling and a digital broadcast of your boat’s position. The VHF 100 also features NOAA weather alerts and Position Tracking, which allows you to locate and keep tabs on up to 3 other boats in the area.

At-a-glance Information
The VHF 100 has a simple interface that’s easy to read while on the go, so you’ll always have the right information at the right time. In addition to dedicated buttons and knobs for ease of use, the VHF 100 features 3 soft keys linked to onscreen menus that allows you to see and select the information you want.
The VHF 100 also offers premium sound quality so every message is loud and clear. And to make sure the data stands out, the information is available on a 3.2" (8.13 cm) display — the largest screen available in its class.

Detailed Design
The VHF 100 can be mounted in a variety of configurations.
With removable front caps, the VHF 100 can be easily added in cockpit consoles or cabin bulkheads. It’s the only front flush-mounting capable marine radio available on the market today, which makes the VHF 100 as flexible as it is functional.
It’s made to last with rugged design that’s also submersible (IPX7 standards), so you’ll get a full-featured marine receiver that’s ready to go in a compact fixed-mount design.

Color: Black
Unit Dimensions, W x H x D: Flush-Mounted: 7.16 x 3.86 x 6.42" (18.2 x 9.8 x 16.3 cm)
Bracket-Mounted: 7.56 x 4.65 x 6.42" (19.2 x 11.8 x 16.3 cm)
Transmitter Output (at 13.6 Vdc): 25 W (HI); 1 W (LO)
Digital Selective Calling: Class D
Frequency Bands: All USA, Canadian, and International marine channels; 10 NOAA weather channels
Frequency Range: 156.050 MHz to 163.275 MHz (including WX channels)
Waterproof: yes (IPX7).

SKU: VHF 100…

Manufacturer
Garmin
Model
VHF 100
Result Pages:
Manufacturers