Result Pages:
Babyfoot Manual Galley Foot Operated Pump Whale GP4618

Babyfoot Manual Galley Foot Operated Pump Whale GP4618

Whale's manual galley pumps are truly design classics.
Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.

Features:
Self-priming foot pump designed for easy installation and use.
Simple foot operated solution for pumping water in the galley
Smooth and easy operation
Comfortable to use - angled top section
Compact for installing in confined spaces
Ideal as a priming pump for use with Whale in line impeller electric pumps
The ideal foot pump for a simple freshwater system

Note: Not for use in pressurized systems

Description: Babyfoot Manual Galley Foot Operated Pump
Hose Size: Suitable for 13 mm (1⁄2") Flexible Hose
Maximum Output per Minute: 8 ltrs (2.2 US gals)

SKU: GP4618.…

Manufacturer
Whale
Model
GP4618
Back Mount HPS TFXtreme Single Rack 14' Steering Cable

Back Mount HPS TFXtreme Single Rack 14' Steering Cable

Seastar TFXTREME HPS premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used as an upgrade for the SSC134 cables with SH5230P helms.
Replaces: SSC15414 Seastar Solutions

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.

Length: 14'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15414
Back Mount HPS TFXtreme Single Rack 15' Steering Cable

Back Mount HPS TFXtreme Single Rack 15' Steering Cable

Seastar TFXTREME HPS premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used as an upgrade for the SSC134 cables with SH5230P helms.
Replaces: SSC15415 Seastar Solutions

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.

Length: 15'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15415
Back Mount HPS TFXtreme Single Rack 16' Steering Cable

Back Mount HPS TFXtreme Single Rack 16' Steering Cable

TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.
Replaces: SSC15416

Length: 16'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15416
Back Mount HPS TFXtreme Single Rack 17' Steering Cable

Back Mount HPS TFXtreme Single Rack 17' Steering Cable

TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.
Replaces: SSC15417

Length: 17'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15417
Back Mount HPS TFXtreme Single Rack 18' Steering Cable

Back Mount HPS TFXtreme Single Rack 18' Steering Cable

TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.
Replaces: SSC15418

Length: 18'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15418
Back Mount HPS TFXtreme Single Rack 19' Steering Cable

Back Mount HPS TFXtreme Single Rack 19' Steering Cable

TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.
Replaces: SSC15419

Length: 19'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15419
Back Mount HPS TFXtreme Single Rack 20' Steering Cable

Back Mount HPS TFXtreme Single Rack 20' Steering Cable

TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.
Replaces: SSC15420

Length: 20'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15420
Back Mount HPS TFXtreme Single Rack 21' Steering Cable

Back Mount HPS TFXtreme Single Rack 21' Steering Cable

TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.

Fits: SH5210P, SH91610P, SH5230P and SH91630P helms.
Replaces: SSC15421

Length: 21'

"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
1-SSCX15421
Backing Plate 316 Stainless Steel CBP

Backing Plate 316 Stainless Steel CBP

MateSeries 316 stainless steel backing plate for round or oval MateSeries rod/cup holders.

SKU: CBP…

Manufacturer
MateSeries
Model
CBP
Backing Plate S/S GEM Standard, Deluxe Rod Holders

Backing Plate S/S GEM Standard, Deluxe Rod Holders

Optional Backing Plate for GEM standard and Deluxe rod holders
Stamped stainless steel
Size: 4.5" x 3.5"

SKU: GEM-315530-BP.…

Manufacturer
GEMLUX Products
Model
GEM-315530-BP
Backlit Push Button Switch Blue OFF/ON - 15A

Backlit Push Button Switch Blue OFF/ON - 15A

Blue Sea Systems New Backlit Push Button Switches are ideal for generator starters, bilge pumps, horns, wipers, engine controls and any other application that requires switching action other than ON-OFF.

Features: Backlit button is blue when OFF and red when ON
Five ICON labels included: Accessory, Lights, Anchor Light, Running Light, and Bilge Pump

Specifications:
Action: OFF-ON
Hole Size: 7/8"
Amperage: 15A @ 12V DC
Nominal Voltage: 12V DC
Maximum Voltage: 15V DC
Maximum LED Operating Current: 20mA
Switching Cycles: 10,000
Temperature Range: -20°C to 55°C
Termination: 3" - Bare Wire Pigtail
Wire Size: Black & Blue Wires 18 AWG / Red & Red/White Wires 14AWG
Sold: Each

WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…

Manufacturer
Blue Sea Systems
Model
4180
Bahama Courtesy Boat Flag 12" x 18" Seachoice 78241

Seachoice 78241 Bahama Courtesy Boat Flag 12" x 18" print dyed nylon.
Canvas header.…

Manufacturer
Seachoice
Model
50-78241
Bailer Safety Emergency Kit

Bailer Safety Emergency Kit 45431

Seachoice quality marine products is dedicated to service and quality at an affordable price.
Bailer safety kit includes 4 items:
50' of buoyant heaving line
Bailer
Pea-less whistle
Watertight LED flashlight (batteries not included).
Contents required by Canadian Coast Guard for vessels up to 8 meters.

SKU: 50-45431.…

Manufacturer
Seachoice
Model
50-45431
Bait Knife 4" Stainless Steel 24 Count Bucket 87201

Bait Knife 4" Stainless Steel 24 Count Bucket 87201

The Seachoice bait knife is the perfect size for preparing bait and performing other boatside tasks.

The stainless steel blade features a serrated top for de-scaling and a line-cutter which is accessible even when the knife is in its sheath.
Includes a vented, easy open, locking sheath for safe storage and easy cleaning.
Lanyard ready, or hang from handle holes.
The contoured white handle fits comfortably in the palm.

Size: 4"
Construction: Stainless Steel
Packaged: Display Bucket of 24.

SKU: 50-87201

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…

Manufacturer
Seachoice
Model
50-87200
Bait Knife 4" Stainless Steel w/Sheath 87201

Bait Knife 4" Stainless Steel w/Sheath 87201

The Seachoice bait knife is the perfect size for preparing bait and performing other boat side tasks.

The stainless steel blade features a serrated top for de-scaling and a line-cutter which is accessible even when the knife is in its sheath.
Includes a vented, easy open, locking sheath for safe storage and easy cleaning.
Lanyard ready, or hang from handle holes.
The contoured white handle fits comfortably in the palm.

Size: 4"
Construction: Stainless Steel
Packaged: 1

SKU: 50-87201

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…

Manufacturer
Seachoice
Model
50-87201
Bait Tank Plumbing Kit Seachoice 89631

Bait Tank Plumbing Kit Seachoice 89631

Seachoice bait tank/Livewell Kit Contains:
Overflow fitting with filter screen.
Fits 1-1/2" hose ID.
Directional inlet & drain plug.…

Manufacturer
Seachoice
Model
50-89631
Bait/Filet Mate Serving /Cutting Table 12-1/2" x 31" T10-303B

Bait/Filet Mate Table 12-1/2" x 31" Magma T10-303B

Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK!
This color core material has thin white cap layers and a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch.
Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables.
This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.

Overview:
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
Magma Offers the Largest Selection of Mounting Options

Description: Bailt/Filet Serving/Cutting Table Only
Size: 12-1/2" x 31".…

Manufacturer
Magma
Model
T10-303B
Bait/Filet Mate Serving /Cutting Table 12-3/4" x 20" T10-302B

Bait/Filet Mate Serving /Cutting Table 12-3/4" x 20" T10-302B

Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK! This color core material has thin white cap layers and a bright black center. Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.

Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables. This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.

Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.

Our T10-302, 20" model, is the perfect addition for any Fisherman with a small open craft where storage is limited while the larger T10-303, 31" model, is big enough for any bait work or filleting those big ones that did not get away.

Description: Bait/Filet Serving/Cutting Table Only without mounts
Size: 20" x 12-3/4" (50.8cm x 32.4cm)
Material: 100% High Density Color Core Polyethylene Construction, UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
Magma Offers the Largest Selection of Mounting Options.…

Manufacturer
Magma
Model
T10-302B
Bait/Filet Mate Table 12-1/2" x 31" w/LeveLock Mount T10-313B

Bait/Filet Mate Table 12-1/2" x 31" w/LeveLock Mount T10-313B

Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK!
This new color core material has thin white cap layers and a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch.
Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables.
This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.

These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance.
It's quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.
The 1-1/2" (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.

Our T10-312, 20" model, is the perfect addition for any Fisherman with a small open craft where storage is limited while the larger
T10-313, 31" model, is big enough for any bait work or filleting those big ones that did not get away.

Overview:
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
LeveLock® Quick Release All Angle Rod Holder Mount

Description: Bait Filet Table with Levelok Rod Holder Mount
Size: 12-1/2" x 31".…

Manufacturer
Magma
Model
T10-313B
Bait/Filet Mate Table 12-3/4" x 20" w/LeveLock Mount T10-312B

Bait/Filet Mate Table 12-3/4" x 20" w/LeveLock Mount T10-312B

Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK!
This new color core material has thin white cap layers and a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch.
Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables.
This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.

These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance.
It's quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.
The 1-1/2" (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.

Our T10-312, 20" model, is the perfect addition for any Fisherman with a small open craft where storage is limited while the larger
T10-313, 31" model, is big enough for any bait work or filleting those big ones that did not get away.

Overview:
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
LeveLock® Quick Release All Angle Rod Holder Mount

Description: Bait Filet Table with Levelok Rod Holder Mount
Size: 12-3/4" x 20".…

Manufacturer
Magma
Model
T10-312B
Bait/Filet Table 12" x 20" Adjustable Rod Mount Taco

Bait/Filet Table 12" x 20" Adjustable Rod Mount Taco

Taco 20" Adjustable Poly Filet Table is designed for extreme durability with U.V. resistance.
Can be used for cutting bait, fileting fish or serving food and beverages.
Made from FDA approved, high density polyethylene that will not discolor, crack, mildew or absorb fish odors and is easy to clean
They feature a storage slot for your filet knife and fishing pliers.

The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders.
The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used.
All fasteners are stainless marine grade quality.

Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a plier
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made In The USA!

Size: 12" x 20"
Mount: Rod Holder.…

Manufacturer
Taco Marine
Model
P01-2120W
Bait/Filet Table 12" x 32" Adjustable Rod Mount Taco

Bait/Filet Table 12" x 32" Adjustable Rod Mount Taco

Taco 32" Adjustable Poly Filet Table is designed for extreme durability with U.V. resistance.
Can be used for cutting bait, fileting fish or serving food and beverages.
Made from FDA approved, high density polyethylene that will not discolor, crack, mildew or absorb fish odors and is easy to clean
They feature a storage slot for your filet knife and fishing pliers.

The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders.
The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used.
All fasteners are stainless marine grade quality.

Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a plier
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made In The USA!

Size: 12" x 32"
Mount: Rod Holder.…

Manufacturer
Taco Marine
Model
P01-2132W
Bait/Filet Table 30" x 12-5/8" Rod Holder Mount

Bait/Filet Table 30" x 12-5/8" Rod Holder Mount

Sea-Dog bailt filet table features easily adjustable, multi-position gimbaled rod holder mounting system included
Solid one piece construction provides a strong, long-lasting part that is easy to clean and maintain
UV stabilized high-density polyethylene
Rod holder mounting system folds flat for easy storage
Assembles in minutes, with all assembly hardware included

Size: 30" x 12-5/8"
Construction: High-density polyethylene
Mount: Multi-position gimbaled rod holder mounting system
Color: White.…

Manufacturer
Sea-Dog
Model
326515-3
Bait/Filet Table Econo Mate™ 12" x 16" Magma

Bait/Filet Table Econo Mate™ 12" x 16" Magma

Magma's versatile Econo-Mate bait and filet tables now have an attractive new look, BLACK!
Constructed with the finest commercial quality high-density polyethylene that is both UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
This material does not absorb fish odors like wood filet tables.
This new color core material has thin white cap layers with a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring your days catch.
With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.
The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety.
Completely assembled with nothing else to buy make this the perfect compact bait / filet table for the Fisherman who is on a budget or limited for space.

Overview:
Size: 16" x 20"
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Quick Release Push/Pull Pin Mounting Bracket Assembly
Folds Completely Flat for Storage
Knife and Pliers Storage
Full Length Slotted Table Back for Overboard Drainage
Mounting Bracket Assembly Sold Separately for Adding Additional Onboard Locations
Comes complete.
No additional mounting hardware required.

Description: Econo Mate Bait Filet Table
Size: 12" x 16"
Color: White/Black.…

Manufacturer
Magma
Model
T10-311B
Bait/Filet Table Econo Mate™ 16" x 20" Magma

Bait/Filet Table Econo Mate™ 16" x 20" Magma

Magma's versatile Econo-Mate bait and filet tables now have an attractive new look, BLACK!
Constructed with the finest commercial quality high-density polyethylene that is both UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
This material does not absorb fish odors like wood filet tables.
This new color core material has thin white cap layers with a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring your days catch.
With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.
The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety.
Completely assembled with nothing else to buy make this the perfect compact bait / filet table for the Fisherman who is on a budget or limited for space.

Overview:
Size: 16" x 20"
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Quick Release Push/Pull Pin Mounting Bracket Assembly
Folds Completely Flat for Storage
Knife and Pliers Storage
Full Length Slotted Table Back for Overboard Drainage
Mounting Bracket Assembly Sold Separately for Adding Additional Onboard Locations
Comes complete.
No additional mounting hardware required.

Description: Econo Mate Bait Filet Table
Size: 16" x 20"
Color: White/Black.…

Manufacturer
Magma
Model
T10-310B
Bait/Filet Table MSR Swivel Mount 14"x 10" Deep Blue MSK-6

Bait/Filet Table MSR Swivel Mount 14"x 10" Deep Blue MSK-6

The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.
Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.

Kit includes:
14" x 10" Size Bait/Filet Table, Ideal For Bait
Includes MSR Rod Holder Mount
100% Marine-Grade Polymer
Lifetime Warranty

SKU: MSK-6, MSK6.…

Manufacturer
Deep Blue Marine
Model
MSK-6
Bait/Filet Table MSR Swivel Mount 21"x 12" Deep Blue MSK-1

Bait/Filet Table MSR Swivel Mount 21"x 12" Deep Blue MSK-1

The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.

Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.
Don't settle for anything less!

Kit includes:
21" x 12" Size Bait/Filet Table
Includes MSR Rod Holder Mount
100% Marine-Grade Polymer
Lifetime Warranty

MSK-1, MSK1.…

Manufacturer
Deep Blue Marine
Model
MSK-1
Bait/Filet Table MSR Swivel Mount 25"x 12" Deep Blue MSK-8

Bait/Filet Table MSR Swivel Mount 25"x 12" Deep Blue MSK-8

The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.

Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.
Don't settle for anything less!

Kit includes:
25" x 12" Size Bait/Filet Table
Includes MSR Rod Holder Mount
100% Marine-Grade Polymer
Lifetime Warranty

SKU: MSK-8, MSK8.…

Manufacturer
Deep Blue Marine
Model
MSK-8
Bait/Filet Table Rod Holder Mount 12-5/8" x 20" 326510-3

Bait/Filet Table Rod Holder Mount 12-5/8" x 20"

Sea-Dog bait filet table is a durable, one-piece UV stabilized high-density polyethylene table that will last for years and easy to clean & maintain.

Includes and easily adjustable, multi-position gimbaled rod holder mount that folds flat for easy storage.

Measures 20" wide by 12-5/8" deep
Assembles in minutes, with all assembly hardware included.

Easily Accessible Knife (3) and pliers holder (1).

Description: Bait Filet Table with Rod Holder Mount
Size: 12-5/8" x 20"
Color: White.…

Manufacturer
Sea-Dog
Model
326510-3
Bait/Filet/Food Tray MSR Swivel Mount 22"x 12-1/2" MSK-2

Bait/Filet/Food Tray MSR Swivel Mount 22"x 12-1/2" MSK-2

The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.

Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.

Don't settle for anything less!
A nice addition to any boat is a place to prepare and serve food.
Now you don't have to use the bait board when it's time to eat.
The Sea Server comes with 2 recessed drink holders and will sit on it's own legs and may be carried from place to place or may be mounted on the MSR.

Lifetime Warranty
FDA Approved.

SKU: MSK-2, MSK2…

Manufacturer
Deep Blue Marine
Model
MSK-2
Ball Mount 2" Drop 8000 lbs. Fulton 21342

Ball Mount 2" Drop 8000 lbs. Fulton 21342

Fulton hitch mount is designed for Class III & IV hitches
Features:
2" Square mount with 1" Trailer ball hole
Solid one-piece forged construction
1" Thick x 3" wide ball platforms
Angled quick load design
Designed to handle heavy duty loads up to 800 lbs. (TW) & 8,000 lbs. (GTW)

Drop: 2"
Class: III & IV
Rating: 800 lbs. (TW) & 8,000 lbs. (GTW)

SKU: 21342, 220-21342…

Manufacturer
Fulton
Model
220-21342
Ball Mount 4" Drop 11"L Fu 6,000 lbs. lton 21345

Ball Mount 4" Drop 11"L 6,000 lbs. Fulton 21345

The Fulton bal lmount with 4" drop is designed for Class III & IV hitches
Features:
2" Square Solid one-piece forged construction with Angled Solid one-piece forged construction
1" Trailer ball hole with 1" T x 3" wide ball platforms
Quick load design
Designed to handle heavy duty loads up to 800 lbs. (TW) & 6,000 lbs. (GTW)
Finish: Black Powder Coat
Size: 2" Sq. x 11"L x 4"D x 2-3/4"R

SKU: 21345, 220-21345…

Manufacturer
Fulton
Model
220-21345
Ball Mount For MSR Mount Deep Blue MS-202

Ball Mount For MSR Mount Deep Blue MS-202

Extra ball mount fits MSR for mounting to parts other than MultiSystem components.

NOTE: All MS components come with this ball.
Order MS-202 for additional uses.…

Manufacturer
Deep Blue Marine
Model
MS-202
Ball Valve Bronze   1/4" IPS Stainless Handle Apollo 7010110

Ball Valve Bronze 1/4" IPS Stainless Handle Apollo 7010110

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 1/4" IPS

SKU: 7010110, 37-7010110.…

Manufacturer
Apollo/Conbraco
Model
37-7010110
Ball Valve Bronze  1/2" IPS Stainless Handle Apollo 7010310

Ball Valve Bronze 1/2" IPS Stainless Handle Apollo 7010310

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 1/2" IPS

SKU: 7010310, 37-7010310…

Manufacturer
Apollo/Conbraco
Model
37-7010310
Ball Valve Bronze  3/4" IPS Stainless Handle Apollo 7010410

Ball Valve Bronze 3/4" IPS Stainless Handle Apollo 7010410

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 3/4" IPS

SKU: 7010410, 37-7010410…

Manufacturer
Apollo/Conbraco
Model
37-7010410
Ball Valve Bronze  3/8" IPS Stainless Handle Apollo 7010210

Ball Valve Bronze 3/8" IPS Stainless Handle Apollo 7010210

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 3/8" IPS

SKU: 7010210, 37-7010210…

Manufacturer
Apollo/Conbraco
Model
37-7010210
Ball Valve Bronze 1-1/2" IPS Stainless Handle Apollo 7010710

Ball Valve Bronze 1-1/2" IPS Stainless Handle Apollo 7010710

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 1-1/2" IPS

SKU: 7010710, 37-7010710…

Manufacturer
Apollo/Conbraco
Model
37-7010710
Ball Valve Bronze 1-1/4" IPS Stainless Handle Apollo 7010610

Ball Valve Bronze 1-1/4" IPS Stainless Handle Apollo 7010610

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 1-1/4" IPS

SKU: 7010610, 37-7010610…

Manufacturer
Apollo/Conbraco
Model
37-7010610
Ball Valve Bronze 1" IPS Stainless Handle Apollo 7010510

Ball Valve Bronze 1" IPS Stainless Handle Apollo 7010510

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 1" IPS

SKU: 7010510, 37-7010510…

Manufacturer
Apollo/Conbraco
Model
37-7010510
Ball Valve Bronze 2" IPS Stainless Handle Apollo 7010810

Ball Valve Bronze 2" IPS Stainless Handle Apollo 7010810

Cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.

NOT TO BE USED IN POTABLE WATER SYSTEMS.

Description: Bronze Ball Valve Stainless Handle
Size: 2" IPS

SKU: 7010810, 37-7010810…

Manufacturer
Apollo/Conbraco
Model
37-7010810
Ball Valve In-Line Full Flow w/Mounting Pads   1/4" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 1/4" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Size: 1/4" IPS
Material: Bronze

SKU: 7710110, 37-7710110…

Manufacturer
Apollo/Conbraco
Model
37-7710110
Ball Valve In-Line Full Flow w/Mounting Pads   3/8" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 3/8" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Size: 3/8" IPS
Material: Bronze

SKU: 7710210, 37-7710210…

Manufacturer
Apollo/Conbraco
Model
37-7710210
Ball Valve In-Line Full Flow w/Mounting Pads  1/2" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 1/2" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Size: 1/2" IPS
Material: Bronze

SKU: 7710310, 37-7710310…

Manufacturer
Apollo/Conbraco
Model
37-7710310
Ball Valve In-Line Full Flow w/Mounting Pads  3/4" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 3/4" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Size: 3/4" IPS
Material: Bronze

SKU: 7710410, 37-7710410…

Manufacturer
Apollo/Conbraco
Model
37-7710410
Ball Valve In-Line Full Flow w/Mounting Pads 1-1/2" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 1-1/2" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Not To Be Used In Portable Water Systems

Size: 1-1/2" IPS
Material: Bronze

SKU: 7710710, 37-7710710…

Manufacturer
Groco
Model
37-7710710
Ball Valve In-Line Full Flow w/Mounting Pads 1-1/4" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 1-1/4" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Size: 1-1/4" IPS
Material: Bronze

SKU: 7710610, 37-7710610…

Manufacturer
Groco
Model
37-7710610
Ball Valve In-Line Full Flow w/Mounting Pads 1" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 1" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Size: 1" IPS
Material: Bronze

SKU: 7710510, 37-7710510…

Manufacturer
Groco
Model
37-7710510
Ball Valve In-Line Full Flow w/Mounting Pads 2" IPS

Ball Valve In-Line Full Flow w/Mounting Pads 2" IPS

Conbraco ball valves come with mounting pads for secure mounting and convenience
Use where full flow is required
Bronze body, chromium plated ball
Reinforced TFE seats & stuffing box ring
Blow out stem design
Stainless steel lever and nut
Meets WW-V-35C Type II
Made in U.S.A.

Not To Be Used In Portable Water Systems

Size: 2" IPS
Material: Bronze

SKU: 7710810, 37-7710810…

Manufacturer
Apollo/Conbraco
Model
37-7710810
Result Pages:
Manufacturers