Babyfoot Manual Galley Foot Operated Pump GP4618
Babyfoot Manual Galley Foot Operated Pump GP4618
Whale's manual galley pumps are truly design classics.
Since the 1960s these manual pumps have been designed, refined and manufactured by our skilled UK based workforce.
Features:
Self-priming foot pump designed for easy installation and use.
Simple foot operated solution for pumping water in the galley
Smooth and easy operation
Comfortable to use - angled top section
Compact for installing in confined spaces
Ideal as a priming pump for use with Whale in line impeller electric pumps
The ideal foot pump for a simple freshwater system
Note: Not for use in pressurized systems
Description: Babyfoot Manual Galley Foot Operated Pump
Hose Size: Suitable for 13 mm (1⁄2") Flexible Hose
Maximum Output per Minute: 8 ltrs (2.2 US gals)
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
Notice: This Pump is manufactured in Ireland, plant was shut down for 2 months due to virus situation! There is a national back order in the USA on these and no one at this time has inventory
As of 5/27/2020 we were told from our sources to expect some product the end of June or first of July!.…
- Manufacturer
- Whale
- Model
- GP4618
.jpg "Back Mount HPS TFXtreme Single Rack 14' Steering Cable")
Back Mount HPS TFXtreme Single Rack 14' Steering Cable
Back Mount HPS TFXtreme Single Rack 14' Steering Cable
Seastar TFXTREME HPS premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used as an upgrade for the SSC134 series cables with SH5230P helms.
Replaces: SSC15414 Seastar Solutions
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Length: 14'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15414
Back Mount HPS TFXtreme Single Rack 15' Steering Cable
Back Mount HPS TFXtreme Single Rack 15' Steering Cable
Seastar TFXTREME HPS premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used as an upgrade for the SSC134 series cables with SH5230P helms.
Replaces: SSC15415 Seastar Solutions
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Length: 15'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15415
Back Mount HPS TFXtreme Single Rack 16' Steering Cable
Back Mount HPS TFXtreme Single Rack 16' Steering Cable
TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 series cables with SH5230P helms.
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Replaces: SSC15416
Length: 16'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15416
Back Mount HPS TFXtreme Single Rack 17' Steering Cable
Back Mount HPS TFXtreme Single Rack 17' Steering Cable
TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 series cables with SH5230P helms.
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Replaces: SSC15417
Length: 17'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15417
Back Mount HPS TFXtreme Single Rack 18' Steering Cable
Back Mount HPS TFXtreme Single Rack 18' Steering Cable
TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Replaces: SSC15418
Length: 18'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15418
Back Mount HPS TFXtreme Single Rack 19' Steering Cable
Back Mount HPS TFXtreme Single Rack 19' Steering Cable
TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Replaces: SSC15419
Length: 19'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15419
Back Mount HPS TFXtreme Single Rack 20' Steering Cable
Back Mount HPS TFXtreme Single Rack 20' Steering Cable
TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 cables with SH5230P helms.
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Replaces: SSC15420
Length: 20'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15420
.jpg "Back Mount HPS TFXtreme Single Rack 21' Steering Cable")
Back Mount HPS TFXtreme Single Rack 21' Steering Cable
Back Mount HPS TFXtreme Single Rack 21' Steering Cable
TFXTREME premium cables have a heavy jacket and a splined, coated core element fo maximum smoothness with minimal lost motion.
(4" min. bend radius) Back HDPE outer casing for durability and best resistance to UV and chemicals.
Cables meet/exceed all applicable industry standards.
Can be used in place of SSC134 series cables with SH5230P helms.
Fits: SH5210P, SH91610P, SH5230P and SH91630P helms & SHT91610 Tilt Helm Module
Replaces: SSC15421
Length: 21'
"Measure Twice, Order Once."
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SSCX15421
Back Mount Rack Steering Kit Single Cable 8' SS141
Back Mount Rack Steering Kit Single Cable 8' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 8'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14108
Back Mount Rack Steering Kit Single Cable 9' SS141
Back Mount Rack Steering Kit Single Cable 9' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 9'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14109
Back Mount Rack Steering Kit Single Cable 10' SS141
Back Mount Rack Steering Kit Single Cable 10' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 10'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14110
Back Mount Rack Steering Kit Single Cable 11' SS141
Back Mount Rack Steering Kit Single Cable 11' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 11'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14111
Back Mount Rack Steering Kit Single Cable 12' SS141
Back Mount Rack Steering Kit Single Cable 12' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 12'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14112
Back Mount Rack Steering Kit Single Cable 13' SS141
Back Mount Rack Steering Kit Single Cable 13' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 13'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14113
Back Mount Rack Steering Kit Single Cable 14' SS141
Back Mount Rack Steering Kit Single Cable 14' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 14'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14114
Back Mount Rack Steering Kit Single Cable 15' SS141
Back Mount Rack Steering Kit Single Cable 15' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 15'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14115
Back Mount Rack Steering Kit Single Cable 16' SS141
Back Mount Rack Steering Kit Single Cable 16' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 16'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14116
Back Mount Rack Steering Kit Single Cable 17' SS141
Back Mount Rack Steering Kit Single Cable 17' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 17'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14117
Back Mount Rack Steering Kit Single Cable 18' SS141
Back Mount Rack Steering Kit Single Cable 18' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 18'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14118
Back Mount Rack Steering Kit Single Cable 19' SS141
Back Mount Rack Steering Kit Single Cable 19' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 19'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14119
Back Mount Rack Steering Kit Single Cable 20' SS141
Back Mount Rack Steering Kit Single Cable 20' SS141
Seastar Solutions SS141 Series replaces 1984 to date Seastar Solutions "The Rack Steering System" without dash modifications.
Requires use of SSC134XX Back Mount Rack cable, supplied.
For single station use only.
Note: SSC124XX old style rack cables CANNOT be used with these systems.
Great for inflatables, bass boats, jet boats and small cruisers with a small space behind the dash.
Back Mount Rack system uses a machine cut pinion gear, which engages a pre-assembled rack and cable with armor-stranded core, featuring precise 4 turns lock-to-Lock.
An ideal replacement for most other systems.
For boats up to 24' and steering wheels up to 16".
Direct replacement for Morse, OMC and Detmar.
Fast, easy installation: back mount design allows quick placement in dash plus mounting hardware fits industry-standard Teleflex rack holes.
Meets A.B.Y.C. standards.
Meets N.M.M.A. certification requirements.
Replaces Uflex Rachtech Series Rack Steering Kit
Cable Length: 19'
Dimensions: 6-1/2"D from dash front x 28-1/2"W
Steering Wheel Shaft: 3/4" tapered shaft
Steering Wheel Size: Up to 16", not included
Kit Includes: helm SH5210P, bezel SB39526P and rack cable SSC134
Warranty: 2 years
"Measure Twice, Order Once"
Cable numbers are printed or embossed at the the steering cable at the engine or midway.
The last two numbers is the length.
No numbers, for rack steering cable replacement, measure existing cable as follows:
Measure plastic cable jacket in inches, add 30", and round up to the next foot.
Order that length cable.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seastar Solutions
- Model
- SS14120
Backing Plate 316 Stainless Steel CBP
Backing Plate 316 Stainless Steel CBP
MateSeries 316 stainless steel backing plate for round or oval MateSeries rod/cup holders.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- MateSeries
- Model
- CBP
Backing Plate S/S GEM Standard, Deluxe Rod Holders
Backing Plate S/S GEM Standard, Deluxe Rod Holders
Optional Backing Plate for GEM standard and Deluxe rod holders
Stamped stainless steel
Size: 4.5" x 3.5"
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- GEMLUX Products
- Model
- 315530-BP
Backlit Push Button Switch Blue OFF/ON - 15A
Backlit Push Button Switch Blue OFF/ON - 15A
Blue Sea Systems New Backlit Push Button Switches are ideal for generator starters, bilge pumps, horns, wipers, engine controls and any other application that requires switching action other than ON-OFF.
Features: Backlit button is blue when OFF and red when ON
Five ICON labels included: Accessory, Lights, Anchor Light, Running Light, and Bilge Pump
Specifications:
Action: OFF-ON
Hole Size: 7/8"
Amperage: 15A @ 12V DC
Nominal Voltage: 12V DC
Maximum Voltage: 15V DC
Maximum LED Operating Current: 20mA
Switching Cycles: 10,000
Temperature Range: -20°C to 55°C
Termination: 3" - Bare Wire Pigtail
Wire Size: Black & Blue Wires 18 AWG / Red & Red/White Wires 14AWG
Sold: Each
WarningWARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…
- Manufacturer
- Blue Sea Systems
- Model
- 4180
![Bahama Courtesy Boat Flag 12" x 18" Seachoice 78241](images/thumbs/150_135/50-78241.jpg "Bahama Courtesy Boat Flag 12" x 18" Seachoice 78241")
Bahama Courtesy Boat Flag 12" x 18" Seachoice 78241
Bahama Courtesy Boat Flag 12" x 18" Seachoice 78241
Seachoice quality marine products is dedicated to service and quality at an affordable price.
Bahama Courtesy Boat Flag is Print-dyed nylon body, canvas header and brass grommets
Size: 12" x 18"
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seachoice
- Model
- 50-78241
Bailer Safety Emergency Kit Seachoice 45431
Bailer Safety Emergency Kit Seachoice 45431
Seachoice quality marine products is dedicated to service and quality at an affordable price.
Bailer safety kit includes 4 items:
50' of buoyant heaving line
Bailer
Pea-less whistle
Watertight LED flashlight (batteries not included).
Contents required by Canadian Coast Guard for vessels up to 8 meters.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seachoice
- Model
- 45431
![Bait Knife 4" Stainless Steel 24 Count Display](images/thumbs/150_135/50-87200_col.jpg "Bait Knife 4" Stainless Steel 24 Count Display")
Bait Knife 4" Stainless Steel 24 Count Display
Bait Knife 4" Stainless Steel 24 Count Display
The Seachoice bait knife is the perfect size for preparing bait and performing other boatside tasks.
The stainless steel blade features a serrated top for de-scaling and a line-cutter which is accessible even when the knife is in its sheath.
Includes a vented, easy open, locking sheath for safe storage and easy cleaning.
Lanyard ready, or hang from handle holes.
The contoured white handle fits comfortably in the palm.
Size: 4"
Construction: Stainless Steel
Packaged: Display Bucket of 24
WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…
- Manufacturer
- Seachoice
- Model
- 50-87200
![Bait Knife 4" Stainless Steel Serrated Contoured Handle](images/thumbs/150_135/50-87201_col.jpg "Bait Knife 4" Stainless Steel Serrated Contoured Handle")
Bait Knife 4" Stainless Steel Serrated Contoured Handle
Bait Knife 4" Stainless Steel Serrated Contoured Handle
The perfect size for preparing bait and performing other boat side tasks.
The stainless steel blade features a serrated top for de-scaling and a line-cutter which is accessible even when the knife is in its sheath.
Includes a vented, easy open, locking sheath for safe storage and easy cleaning.
Lanyard ready, or hang from handle holes.
The contoured white handle fits comfortably in the palm.
Length: 4"
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seachoice
- Model
- 50-87201
Bait Tank - Ice Chest Aerator Kit 450 Gph
Bait Tank - Ice Chest Aerator Kit 450 Gph
Aerator converts any good sized ice chest into your own portable live bait tank.
Will keep your live bait alive, or catch fresh, even during the heat of the day.
Includes a sturdy bilge mate pump, hose, spray bar, press on clamp, battery clamps and clear-cut instructions.
Since there are no holes to drill the chest can always be returned to its original purpose.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Johnson Pump
- Model
- 189-24052
Bait Tank Aeration Plumbing Kit w/Instructions BWK-2-DP
Bait Tank Aeration Plumbing Kit w/Instructions BWK-2-DP
This kit contains everything needed to rig a baitwell or tank.
This kit includes professionally designed systems for aeration, directional flow, overflow drain and complete drain accessories.
Just plumb your tank according to the detailed installation instructions.
The kit contains the following T-H Marine products:
(1) ODT-190, 90 degree overflow drain tube
(1) TH-1202, 1-1/4" thru hull w/5/8 barb, thru-hull for overflow control, drain plugging and well draining
(1) AHV-1, valved aeration head for pumping in fresh water
(1) DAH-90, directional aerator head for current creation
(1) Tee: 3/4", tee to connect both aerator heads to aerator pump
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- T-H Marine
- Model
- BWK-2-DP
![Bait Tank/Live Well Plumbing Kit 1-1/2" Hose](images/thumbs/150_135/50-89631.jpg "Bait Tank/Live Well Plumbing Kit 1-1/2" Hose")
Bait Tank/Live Well Plumbing Kit 1-1/2" Hose
Bait Tank/Live Well Plumbing Kit 1-1/2" Hose
Plumb your boat's live well bait tank with a plumbing kit by Seachoice
Kit Contains:
Overflow fitting with filter screen.
Fits 1-1/2" hose ID.
Directional inlet & drain plug
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Seachoice
- Model
- 89631
![Bait/Filet Mate Serving /Cutting Table 12-1/2" x 31" T10-303B](images/thumbs/150_135/Magma__T10-303B_51014_1.gif "Bait/Filet Mate Serving /Cutting Table 12-1/2" x 31" T10-303B")
Bait/Filet Mate Serving /Cutting Table 12-1/2" x 31" T10-303B
Bait/Filet Mate Table 12-1/2" x 31" Magma T10-303B
Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK!
This color core material has thin white cap layers and a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch.
Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables.
This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
Overview:
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
Magma Offers the Largest Selection of Mounting Options
Description: Bailt/Filet Serving/Cutting Table Only
Size: 12-1/2" x 31".
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Magma
- Model
- T10-303B
![Bait/Filet Mate Serving /Cutting Table 12-3/4" x 20" T10-302B](images/thumbs/150_135/Magma__T10-302B_51013_1.gif "Bait/Filet Mate Serving /Cutting Table 12-3/4" x 20" T10-302B")
Bait/Filet Mate Serving /Cutting Table 12-3/4" x 20" T10-302B
Bait/Filet Mate Serving /Cutting Table 12-3/4" x 20" T10-302B
Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK! This color core material has thin white cap layers and a bright black center. Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch. Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables. This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
Our T10-302, 20" model, is the perfect addition for any Fisherman with a small open craft where storage is limited while the larger T10-303, 31" model, is big enough for any bait work or filleting those big ones that did not get away.
Description: Bait/Filet Serving/Cutting Table Only without mounts
Size: 20" x 12-3/4" (50.8cm x 32.4cm)
Material: 100% High Density Color Core Polyethylene Construction, UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
Magma Offers the Largest Selection of Mounting Options.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Magma
- Model
- T10-302B
![Bait/Filet Mate Table 12-1/2" x 31" w/LeveLock Mount T10-313B](images/thumbs/150_135/Magma__T10-313B_51018_1.gif "Bait/Filet Mate Table 12-1/2" x 31" w/LeveLock Mount T10-313B")
Bait/Filet Mate Table 12-1/2" x 31" w/LeveLock Mount T10-313B
Bait/Filet Mate Table 12-1/2" x 31" w/LeveLock Mount T10-313B
Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK!
This new color core material has thin white cap layers and a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch.
Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables.
This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance.
It's quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.
The 1-1/2" (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.
Our T10-312, 20" model, is the perfect addition for any Fisherman with a small open craft where storage is limited while the larger
T10-313, 31" model, is big enough for any bait work or filleting those big ones that did not get away.
Overview:
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
LeveLock® Quick Release All Angle Rod Holder Mount
Description: Bait Filet Table with Levelok Rod Holder Mount
Size: 12-1/2" x 31".…
- Manufacturer
- Magma
- Model
- T10-313B
![Bait/Filet Mate Table 12-3/4" x 20" w/LeveLock Mount T10-312B](images/thumbs/150_135/Magma__T10-312B_51017_1.gif "Bait/Filet Mate Table 12-3/4" x 20" w/LeveLock Mount T10-312B")
Bait/Filet Mate Table 12-3/4" x 20" w/LeveLock Mount T10-312B
Bait/Filet Mate Table 12-3/4" x 20" w/LeveLock Mount T10-312B
Magma's original "Bait/Filet Mate" tables have an attractive new look, BLACK!
This new color core material has thin white cap layers and a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring the days catch.
Not just designed for bait preparation or fish cleaning but can also be used for food or cocktail service.
Constructed with the finest commercial quality high-density polyethylene that is virtually indestructible, practical, will not absorb fish odors, and more sanitary than wood filet tables.
This material is UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
Equipped with (2) redesigned knife holsters that accommodate larger filet knives, handy receptacle for Pliers, rounded edges / corners for safety, and side channels with a slotted table back that permits drainage from the work surface while keeping your deck clean of scales and residue when preparing, cleaning, or filleting.
These tables are supplied with the LeveLock® all-angle fish rod holder mount, which is our most popular mount and has been manufactured using heat-treated Stainless Steel and hard-anodized aluminum for superior corrosion resistance.
It's quick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage.
The 1-1/2" (38 mm) 304 Stainless Steel tube has 8 different rotation positions and fits most cross-pin type rod holders.
Our T10-312, 20" model, is the perfect addition for any Fisherman with a small open craft where storage is limited while the larger
T10-313, 31" model, is big enough for any bait work or filleting those big ones that did not get away.
Overview:
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Pliers Storage and (2) Knife Holsters
Slotted Table Back for Overboard Drainage
LeveLock® Quick Release All Angle Rod Holder Mount
Description: Bait Filet Table with Levelok Rod Holder Mount
Size: 12-3/4" x 20"
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Magma
- Model
- T10-312B
![Bait/Filet Table Econo Mate™ 12" x 16" Magma](images/thumbs/150_135/Magma__T10-311B_51016_1.gif "Bait/Filet Table Econo Mate™ 12" x 16" Magma")
Bait/Filet Table Econo Mate™ 12" x 16" Magma
Bait/Filet Table Econo Mate™ 12" x 16" Magma
Magma's versatile Econo-Mate bait and filet tables now have an attractive new look, BLACK!
Constructed with the finest commercial quality high-density polyethylene that is both UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
This material does not absorb fish odors like wood filet tables.
This new color core material has thin white cap layers with a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring your days catch.
With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.
The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety.
Completely assembled with nothing else to buy make this the perfect compact bait / filet table for the Fisherman who is on a budget or limited for space.
Overview:
Size: 16" x 20"
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Quick Release Push/Pull Pin Mounting Bracket Assembly
Folds Completely Flat for Storage
Knife and Pliers Storage
Full Length Slotted Table Back for Overboard Drainage
Mounting Bracket Assembly Sold Separately for Adding Additional Onboard Locations
Comes complete.
No additional mounting hardware required.
Description: Econo Mate Bait Filet Table
Size: 12" x 16"
Color: White/Black.…
- Manufacturer
- Magma
- Model
- T10-311B
![Bait/Filet Table Econo Mate™ 16" x 20" Magma](images/thumbs/150_135/Magma__T10-310B_51015_1.gif "Bait/Filet Table Econo Mate™ 16" x 20" Magma")
Bait/Filet Table Econo Mate™ 16" x 20" Magma
Bait/Filet Table Econo Mate™ 16" x 20" Magma
Magma's versatile Econo-Mate bait and filet tables now have an attractive new look, BLACK!
Constructed with the finest commercial quality high-density polyethylene that is both UV stabilized and FDA approved for mildew free, crack free, and maintenance free use.
This material does not absorb fish odors like wood filet tables.
This new color core material has thin white cap layers with a bright black center.
Our "Magma" logo and handy new ruler has been engraved to show the black core for a clean look while increasing visibility when measuring your days catch.
With an injection-molded polyethylene mounting bracket and stainless steel push/pull pin, these tables attach and detach instantly.
The table is supplied with a stainless steel hinge bracket that folds completely flat for compact storage, convenient knife / pliers storage slots, full length slotted back and side channels for drainage with all edges and corners rounded for safety.
Completely assembled with nothing else to buy make this the perfect compact bait / filet table for the Fisherman who is on a budget or limited for space.
Overview:
Size: 16" x 20"
100% High Density Color Core Polyethylene Construction
UV Stabilized FDA Approved
Quick Release Push/Pull Pin Mounting Bracket Assembly
Folds Completely Flat for Storage
Knife and Pliers Storage
Full Length Slotted Table Back for Overboard Drainage
Mounting Bracket Assembly Sold Separately for Adding Additional Onboard Locations
Comes complete.
No additional mounting hardware required.
Description: Econo Mate Bait Filet Table
Size: 16" x 20"
Color: White/Black.…
- Manufacturer
- Magma
- Model
- T10-310B
![Bait/Filet Table MSR Swivel Rod Holder Mount 14"x 10"](images/thumbs/150_135/501-1-md.jpg "Bait/Filet Table MSR Swivel Rod Holder Mount 14"x 10"")
Bait/Filet Table MSR Swivel Rod Holder Mount 14"x 10"
Bait/Filet Table MSR Swivel Mount 14"x 10"
The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.
Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.
Don't settle for anything less!
Lifetime warranty
Kit includes:
14" x 10" Size Bait/Filet Table, Ideal For Bait
Includes MSR Rod Holder Mount
100% Marine-Grade Polymer
Lifetime Warranty
Made in the USA!…
- Manufacturer
- Deep Blue Marine
- Model
- MSK-6
![Bait/Filet Table MSR Swivel Rod Holder Mount 21"x 12"](images/thumbs/150_135/384-1-md.jpg "Bait/Filet Table MSR Swivel Rod Holder Mount 21"x 12"")
Bait/Filet Table MSR Swivel Rod Holder Mount 21"x 12"
Bait/Filet Table MSR Swivel Rod Holder Mount 21"x 12"
The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.
Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.
Don't settle for anything less!
Kit includes:
21" x 12" Size Bait/Filet Table
Includes MSR Rod Holder Mount
100% Marine-Grade Polymer
Lifetime Warranty
Made in the USA!…
- Manufacturer
- Deep Blue Marine
- Model
- MSK-1
![Bait/Filet Table MSR Swivel Rod Holder Mount 25"x 12"](images/thumbs/150_135/502-1-md.jpg "Bait/Filet Table MSR Swivel Rod Holder Mount 25"x 12"")
Bait/Filet Table MSR Swivel Rod Holder Mount 25"x 12"
Bait/Filet Table MSR Swivel Rod Holder Mount 25"x 12"
The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.
Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.
Don't settle for anything less!
Kit includes:
25" x 12" Size Bait/Filet Table
Includes MSR Rod Holder Mount
100% Marine-Grade Polymer
Lifetime Warranty
Made in the USA!…
- Manufacturer
- Deep Blue Marine
- Model
- MSK-8
![Bait/Filet Table Rod Holder Mount 12-5/8" x 20" 326510-3](images/thumbs/150_135/326510.jpg "Bait/Filet Table Rod Holder Mount 12-5/8" x 20" 326510-3")
Bait/Filet Table Rod Holder Mount 12-5/8" x 20" 326510-3
Bait/Filet Table Rod Holder Mount 12-5/8" x 20"
Sea-Dog bait filet table is a durable, one-piece UV stabilized high-density polyethylene table that will last for years and easy to clean & maintain.
Includes and easily adjustable, multi-position gimbaled rod holder mount that folds flat for easy storage.
Measures 20" wide by 12-5/8" deep
Assembles in minutes, with all assembly hardware included.
Easily Accessible Knife (3) and pliers holder (1).
Description: Bait Filet Table with Rod Holder Mount
Size: 12-5/8" x 20"
Color: White
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Sea-Dog
- Model
- 326510-3
![Bait/Filet Table Rod Holder Mount 12" x 20" Adjustable](images/thumbs/150_135/P01-2120W.jpg "Bait/Filet Table Rod Holder Mount 12" x 20" Adjustable")
Bait/Filet Table Rod Holder Mount 12" x 20" Adjustable
Bait/Filet Table Rod Holder Mount 12" x 20" Adjustable
Taco 20" Adjustable Poly Filet Table is designed for extreme durability with U.V. resistance.
Can be used for cutting bait, fileting fish or serving food and beverages.
Made from FDA approved, high density polyethylene that will not discolor, crack, mildew or absorb fish odors and is easy to clean
They feature a storage slot for your filet knife and fishing pliers.
The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, brightdip anodized pipe to fit all standard size rod holders.
The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used.
All fasteners are stainless marine grade quality.
Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a plier
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made In The USA!
Size: 12" x 20"
Mount: Rod Holder.…
- Manufacturer
- Taco Marine
- Model
- P01-2120W
![Bait/Filet Table Rod Holder Mount 30" x 12-5/8"](images/thumbs/150_135/354-3265153..jpg "Bait/Filet Table Rod Holder Mount 30" x 12-5/8"")
Bait/Filet Table Rod Holder Mount 30" x 12-5/8"
Bait/Filet Table Rod Holder Mount 30" x 12-5/8"
Sea-Dog bailt filet table features easily adjustable, multi-position gimbaled rod holder mounting system included
Solid one piece construction provides a strong, long-lasting part that is easy to clean and maintain
UV stabilized high-density polyethylene
Rod holder mounting system folds flat for easy storage
Assembles in minutes, with all assembly hardware included
Size: 30" x 12-5/8"
Construction: High-density polyethylene
Mount: Multi-position gimbaled rod holder mounting system
Color: White.…
- Manufacturer
- Sea-Dog
- Model
- 326515-3
![Bait/Filet Table Rod Holder Mount Adjustable 12" x 20"](images/thumbs/150_135/0011955_p01-2120.jpeg "Bait/Filet Table Rod Holder Mount Adjustable 12" x 20"")
Bait/Filet Table Rod Holder Mount Adjustable 12" x 20"
Bait/Filet Table Rod Holder Mount Adjustable 12" x 20"
Taco's Filet table is designed for extreme durability with U.V. resistance.
Can be used for cutting bait, fileting fish or serving food and beverages.
Made from FDA approved, high density polyethylene that will not discolor, crack, mildew or absorb fish odors and is easy to clean.
They feature a storage slot for your filet knife and fishing pliers.
The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, bright-dip anodized pipe to fit all standard size rod holders.
The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used.
All fasteners are stainless marine grade quality.
Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made in USA
Size: 12" x 20"
Color: White
Mounting: Rod Holder
Warranty: 1 Year
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Taco Marine
- Model
- P01-2120W
![Bait/Filet Table Rod Holder Mount Adjustable 12" x 32"](images/thumbs/150_135/0010334_p01-2132.jpeg "Bait/Filet Table Rod Holder Mount Adjustable 12" x 32"")
Bait/Filet Table Rod Holder Mount Adjustable 12" x 32"
Bait/Filet Table Rod Holder Mount Adjustable 12" x 32"
Taco's Filet table is designed for extreme durability with U.V. resistance.
Can be used for cutting bait, fileting fish or serving food and beverages.
Made from FDA approved, high density polyethylene that will not discolor, crack,
mildew or absorb fish odors and is easy to clean.
They feature a storage slot for your filet knife and fishing pliers.
The universal-adjustable mount is made from high strength injection molded glass reinforced nylon attached to a brushed, bright-dip anodized pipe to fit all standard size rod holders.
The quick release ergonomic knob allows for convenient angle adjustment and flat storage when not being used.
All fasteners are stainless marine grade quality.
Features:
FDA-approved, UV-stabilized, high density Polyethylene table
Holds a knife and a
Drainage openings for easy clean-up
Anodized Aluminum mount fits into any standard gunnel rod holder
Rugged engineered nylon tilt mount locks at many angles
Folds flat for storage under deck
Stainless fasteners & easy to assemble mount
Turning the position washer 1/4 turn allows for 6 additional angles for table to rest at
Limited one year warranty
Made in USA
Size: 12" x 32"
Color: White
Mounting: Rod Holder
Warranty: 1 Year
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Taco Marine
- Model
- P01-2132W
Bait/Filet/Food Tray w/Swivel Rod Holder Mount
Bait/Filet/Food Tray w/Swivel Rod Holder Mount
The Next Generation in Rod Holder Accessories - The Interchangeable Deep Blue MultiSystem.
The only multiple use rod holder accessory system available!
One MSR Swivel Mount is all you need to hold many different accessories in any rod holder at any angle.
Simple to use, no tools are required to change products.
Change your bait board to a food tray in seconds or refill your reel quickly and easily.
Saves money, save 50% or more over comparable individual accessories.
Don't settle for anything less!
A nice addition to any boat is a place to prepare and serve food.
Now you don't have to use the bait board when it's time to eat.
The Sea Server comes with 2 recessed drink holders and will sit on it's own legs and may be carried from place to place or may be mounted on the MSR.
Lifetime Warranty
FDA Approved.
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Deep Blue Marine
- Model
- MSK-2
![Baitwell Pump Centrifugal 17 GPM 12VDC 3/4" In, 1/2" Out](images/thumbs/150_135/93012.jpg "Baitwell Pump Centrifugal 17 GPM 12VDC 3/4" In, 1/2" Out")
Baitwell Pump Centrifugal 17 GPM 12VDC 3/4" In, 1/2" Out
Baitwell Pump Centrifugal 17 GPM 12VDC 3/4" In, 1/2" Out
Groco centrifugal pump is ideal for baitwell or any onboard pumping job that needs high flow and low pressure.
Includes garden hose adapter.
Motor is "Ignition Protected" and has a 316 stainless steel shaft
Continuous duty mechanical shaft seal
NOT TO BE USED IN POTABLE WATER SYSTEMS
GPM: 17
Inlet: 3/4" NPT/Outlet: 1/2" NPT
Volts: 12VDC
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Groco
- Model
- CP20
Ball Mount For MSR Mount Deep Blue MS-202
Ball Mount For MSR Mount Deep Blue MS-202
Extra ball mount fits MSR for mounting to parts other than MultiSystem components.
NOTE: All MS components come with this ball.
Order MS-202 for additional uses.…
- Manufacturer
- Deep Blue Marine
- Model
- MS-202
![Ball Valve Bronze 1/4" IPS Stainless Handle 7010110](images/thumbs/150_135/86342.jpg "Ball Valve Bronze 1/4" IPS Stainless Handle 7010110")
Ball Valve Bronze 1/4" IPS Stainless Handle 7010110
Ball Valve Bronze 1/4" IPS Stainless Handle 7010110
Apollo ball valves feature cast bronze with a stainless steel handle and stem nut.
Ball is chrome plated for long lasting corrosion resistance.
Reinforced TFE seats and stuffing box ring.
Made in U.S.A.
NOT TO BE USED IN POTABLE WATER SYSTEMS.
Series: 70-140 Series Bronze Ball Valve Stainless Handle
Size: 1/4" IPS
⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…
- Manufacturer
- Apollo/Conbraco
- Model
- 7010110
- Trouble Your VHF Antenna
- Navigation Light Switch Diagram
- West Systems How To Videos
- Mercury Propeller Wizard
- How Care & Maintain Your Outriggers
- Product Warranties
- Water Sports Safety Code
- Turning Point Propeller Wizzard
- Single Crimp vs Double Crimp
- Marine Surge Protector Video
- How To: Safe Boating Video
- Change Manual To Hydraulic Steering
- How To Bleed Hydraulic Steering
- Propeller Information
- Arco Wiring & Circuit Tech Tips
- How To Measure A Steering Cable
- Big Ice Tray Ideas
- Clamp-On Rod Holder Rail Chart
- How To Measure Control Cables
- How To Install A Bimini Top
- How To Light Up Your Bass Boat
- How To Winterize Your Boat
- How To Replace Gimbal Bearing
- MX2 Battery Conditioner
old fashion service
Todd, I just wanted to let you know that I received my orde...
by William Bohlander
Great Customer Service
I had emailed with a question about my order, and left my ce...
by Dennis Stokes
Outstanding customer Service
It was early evening, on a Friday. I had left a voicemail me...
by HAROLD LAYSER
