Result Pages:
6-1/2" 2-Way Marine Speakers 200 Watts (White) Boss Marine MR60W

Boss Marine MR60W 6-1/2" 2-Way Marine Speakers (White)

Boss Marine loud speakers provide excellent performance in rough saltwater conditions.
Designed with polypropylene cones, rubber surrounds & heavy-duty polymer-based speaker frames, ensure that speakers are impervious to moisture & eliminates any harm due to splashing of saltwater.
The protective coating blocks UV rays, maintains materials integrity & keeps the speakers looking good.

Specs: 200 watts peak, 100W continueous RMS power handling.
Impedance: 4 ohms
Magnet structure: 40 oz.
Freq. Resp: 80Hz to 20kHz.
Tweeter: 1'' Mylar dome.
Woofer: Poly-injection cone with 3/4" voice coil.
Plastic grills.
Color: White
Sold by pair.…

Manufacturer
Boss Audio
Model
153-MR60W
6-1/2" 2-Way Marine Speakers 200 Watts Fusion MSFR6520

6.5" 2-Way Marine Speakers 200 Watt Fusion MSFR6520

Fusion 2-way marine speakers feature a unique poly carbon cone and removable grill for color coding with water resistant construction.
Thoroughly tested to ensure consistent and reliable performance.
Designed for optimal sound reproduction across the full audible spectrum - the human ear is most sensitive to amplitude, pitch, clarity and linearity in the 375Hz to 3kHz bandwidth.

Specifications:
High Quality Poly Carbon Cone
Water Resistant Construction 2-Way Design
25 oz. Magnet / 50 oz Magnet Structure
1” High Temperature Aluminium Voice Coil
1” Mylar Dome Tweeter
Max Power: 200 Watts.
Frequency Response: 80-20,000 Hz
Sensitivity: 90dB (1W/1M)
Impedance: 4 Ohm

Packaged: 1-pair
Size: 6.5"

SKU:

WarningWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.…

Manufacturer
Fusion
Model
MS-FR6520
6-1/2" 2-Way Speakers (White) Boss Marine MR652C (White)

Boss Marine MR652C 6-1/2" 2-Way Marine Speakers (White)

Boss Marine loud speakers provide excellent performance in rough saltwater conditions.
Designed with polypropylene cones, rubber surrounds & heavy-duty polymer-based speaker frames, ensure that speakers are impervious to moisture & eliminates any harm due to splashing of saltwater.
The protective coating blocks UV rays, maintains materials integrity & keeps the speakers looking good.

Boss 6-1/2" speakers features removable tweeters & crossovers to be used as a component set.

350W Peak Power handling
Impedance: 4 ohm
Frequency response: 60Hz - 20kHz
Sound Pressure Level: 1 Watt @ 1 Meter is 92dB.
Cone material: Poly injection
Woofer Voice coil: 1-1/2" Aluminum
Tweeter: 1" Mylar.
Speaker size: 6.5"
Color: White…

Manufacturer
Boss Audio
Model
153-MR652C
6-1/2" Dual Cone Marine Speakers 180 Watts (Black) Boss MR6B

Boss MR6B 6-1/2" Dual Cone Marine Speakers 180 Watts (Black)

Add the MR6B Boss Marine Speakers to your sound system to enhance the music in your boat.
These marine 6.5" dual cone audio speakers come in a sleek and stylish black color.
The shallow mounting speaker design, only 2-1/8" will suit a variety of boat installations
Install the white Boss 6.5" Speakers in your boat to boost sound while you relax on the water.

Total power: 180 Watts
Frequency response: 80 Hz to 20 Hz
Poly injection cone with wizzer cone & aluminum voice coil
SPL (1 Watt / 1 Meter): 89 dB
2-1/8" mounting depth.
Color: Black
Packaged: 1-pair…

Manufacturer
Boss Audio
Model
153-MR6B
6-1/2" Dual Cone Marine Speakers 180 Watts (White) Boss MR6W

Boss MR6W 6-1/2" Dual Marine Cone Speakers 180 Watts (White)

Add the MR6W Boss Marine Speakers to your sound system to enhance the music in your boat.
These marine 6.5" dual cone audio speakers come in a sleek and stylish white color.
The shallow mounting speaker design, only 2-1/8" will suit a variety of boat installations
Install the white Boss 6.5" Speakers in your boat to boost sound while you relax on the water.

Total power: 180 Watts
Frequency response: 80 Hz to 20 Hz
Poly injection cone with wizzer cone & aluminum voice coil
SPL (1 Watt / 1 Meter): 89 dB
2-1/8" mounting depth.
Color: White
Packaged: 1-pair.…

Manufacturer
Boss Audio
Model
153-MR6W
6.5" 2-Way 150 Watt Marine Speakers (Black) 1-pr. SPK652B

6.5" 2-Way 150 Watt Marine Speakers (Black) 1-pr. SPK652B

Milennia Ultramodern, cutting-edge styling with strong, clear audio.

These 6-1/2" round coaxial speakers are all molded UV and water resistant and deliver up to 150 watts of high quality sound.

The integrated grill assembly simplifies installation.

Size: 6.5" 2-Way
Color: Black
Hole Cut Out: 5-1/4"
Depth: 2-1/2"
Tweeter: 20-MM
Wattage: 150 IPP

SKU: SPK652B.…

Manufacturer
Prospec
Model
SPK652B
6.5" 2-Way Marine Speakers 200 Watts (Black) 1-pr. MR62B

6.5" 2-Way Marine Speakers 200 Watts (Black) 1-pr. MR62B

Boss Marine loud speakers provide excellent performance in rough saltwater conditions.
Designed with polypropylene cones, rubber surrounds & heavy-duty polymer-based speaker frames, ensure that speakers are impervious to moisture & eliminates any harm due to splashing of saltwater.
The protective coating blocks UV rays, maintains materials integrity & keeps the speakers looking good.

Size: 6.5" 2-Way
Power Handling: 200 watts peak, 100W continuous RMS power handling.
Impedance: 4 ohms
Magnet structure: 40 oz.
Freq. Resp: 80Hz to 20kHz.
Tweeter: 1'' Mylar dome.
Woofer: Poly-injection cone with 3/4" voice coil.
Plastic grills.
Color: Black
Sold in pairs

SKU: MR62B.…

Manufacturer
Boss Audio
Model
MR62B
6.5" Coaxial Marine Speaker w/RGB LED Lights Boss MRGB65

6.5" Coaxial Marine Speaker w/RGB LED Lights Boss MRGB65

Rock your boat!
Good times become great times with the company of these on board.

Powerful 6.5"speakers built for the marine environment, equipped with professional-grade RGB LEDs integrated behind the grille will naturally carry a big statement.
Included remote for the RGB LEDs gives you a fully-tuneable lighting system that allows full control to orchestrate whatever light show you can imagine.

Features:
6.5" Marinized Coaxial
200 Watts
Polypropylene Cone with Dome Tweeter
Resin Impregnated Surround Material
ABS basket
RGB-LED Illuminated Grilles allow user to Strobe, Flash, Fade through Several Colors

Grill Color: White
Power Handling: 200 Watts MAX / 100 Watts RMS Power Handling per pair
Frequency Response: 70 Hz to 20 kHz
Sensitivity: 88dB
Impedance: 4 Ω
Packaged: 1-pr.

SKU: MRGB65, 153-MRGB65.…

Manufacturer
Boss Audio
Model
153-MRGB65
6.5" Coaxial Marine Speaker w/RGB LED Lights Boss MRGB65S

6.5" Coaxial Marine Speaker w/RGB LED Lights Boss MRGB65S

Rock your boat!
Good times become great times with the company of these on board.

Powerful 6.5"speakers built for the marine environment, equipped with professional-grade RGB LEDs integrated behind the grille will naturally carry a big statement.
Included remote for the RGB LEDs gives you a fully-tuneable lighting system that allows full control to orchestrate whatever light show you can imagine.

Features:
6.5" Marinized Coaxial
200 Watts
Polypropylene Cone with Dome Tweeter
Resin Impregnated Surround Material
ABS basket
RGB-LED Illuminated Grilles allow user to Strobe, Flash, Fade through Several Colors

Grill Color: Silver
Power Handling: 200 Watts MAX / 100 Watts RMS Power Handling per pair
Frequency Response: 70 Hz to 20 kHz
Sensitivity: 88dB
Impedance: 4 Ω
Packaged: 1-pr.

SKU: MRGB65S, 153-MRGB65S.…

Manufacturer
Boss Audio
Model
153-MRGB65S
6.5" Coaxial Marine Speakers 180 Watts (White) Pair

6.5" Coaxial Marine Speakers 180 Watts (White) Pair

JBL Marine Series Speakers are ready to take on anything Mother Nature throws your way. With Plus One™ woofers and balanced dome tweeters, you'll hear the clarity of your audio above the raucous sounds of the sea. Designed to take on the sun, sea spray and scrub downs, these powerful speakers feature waterproof motor structures, a one-piece cast-polymer basket, a sealed magnet, and rubber surrounds.

Product Features:
Plus One™ Woofer Cones:
Plus One™ polypropylene cones provide more overall speaker-cone area than other cones in its class - the result is higher sensitivity, increased low-frequency output and greater musical character.

Balanced Dome Tweeters:
Weather resistant tweeters deliver a smooth high-frequency response and increased power handling for highs and mids, which equates to more lifelike sound from vocals, cymbals, brass instruments and pianos.

Designed for the Elements:
Their one-piece polymer basket is designed to stand the test of time, even after long exposure to the sun and salt. Rubber surrounds offer superior edge protection and are much more reliable than foam. And a grille-mounted tweeter allows the front of the woofer cone to be sealed, protecting the motor structure from sea spray.

Individually Voiced:
For most brands, off-the-shelf speakers and a cursory approval of frequency response curves are good enough. That's not the case with JBL. We don't only listen to our speakers against the competition - we voice them against each other to ensure each line has the consistent JBL sound signature that's known and sought out by those who care about their audio. This is just part of an extensive development process undertaken by some of the best transducer engineers in the world to provide the finest listening experience at any price point.
OEM-Level Reliability Testing:

JBL tests every speaker design to rigid specifications, subjecting them to extreme conditions that would break lesser speakers - this ideal for equipment that will be heavily driven in the elements. We freeze them, bake them, shake them, blast them with ultraviolet light and drive them at full power for days to make sure your audio investment lasts for years.

Specifications:
Type: 6" Coaxial
Power Handling (Peak): 180W
Frequency Response: 50 Hz - 20 kHz
Sensitivity: 90 db
Nominal Impedance: 4 ohms
Warranty: USA Warranty Length - 1 Year

SKU: MS6520…

Manufacturer
JBL Marine
Model
MS6520
6.5" Dual Cone Marine Speakers 150 Watts (White) Pair

6.5" Dual Cone Marine Speakers 150 Watts (White) Pair

JBL Marine Series Speakers are ready to take on anything Mother Nature throws your way. With Plus One™ woofers and balanced dome tweeters, you'll hear the clarity of your audio above the raucous sounds of the sea. Designed to take on the sun, sea spray and scrub downs, these powerful speakers feature waterproof motor structures, a one-piece cast-polymer basket, a sealed magnet, and rubber surrounds.

Product Features:
Plus One™ Woofer Cones:
Plus One™ polypropylene cones provide more overall speaker-cone area than other cones in its class - the result is higher sensitivity, increased low-frequency output and greater musical character.
Fitted with whizzer cone provides full range performance with single cone

Designed for the Elements:
Their one-piece polymer basket is designed to stand the test of time, even after long exposure to the sun and salt. Rubber surrounds offer superior edge protection and are much more reliable than foam. And a grille-mounted tweeter allows the front of the woofer cone to be sealed, protecting the motor structure from sea spray.

Individually Voiced:
For most brands, off-the-shelf speakers and a cursory approval of frequency response curves are good enough. That's not the case with JBL. We don't only listen to our speakers against the competition - we voice them against each other to ensure each line has the consistent JBL sound signature that's known and sought out by those who care about their audio. This is just part of an extensive development process undertaken by some of the best transducer engineers in the world to provide the finest listening experience at any price point.
OEM-Level Reliability Testing:

JBL tests every speaker design to rigid specifications, subjecting them to extreme conditions that would break lesser speakers - this ideal for equipment that will be heavily driven in the elements. We freeze them, bake them, shake them, blast them with ultraviolet light and drive them at full power for days to make sure your audio investment lasts for years.

Specifications:
Type: 6" Dual Cone
Color: White
Nominal Impedance: 4 ohms
Power Handling: 150W Peak, 75W continueous RMS
Frequency respone: 55Hz-18kHz
Stainless steel mounting hardware included.
Sold in pairs.
Warranty: USA Warranty Length - 1 Year

SKU: MS6510…

Manufacturer
JBL Marine
Model
MS-6510
6" Round 2-Way 200 Watt Marine Speakers 1-pr. Fusion FR6022

6" Round 2-Way 200 Watt Marine Speakers 1-pr. Fusion FR6022

Fusion 6" Full Range Series Marine 2-Way Speakers with 3 Speaker Grilles for that custom look!
2-Way Speaker features sCurv Cone Technology: A woven polypropylene composite, heat pressed to form a lighter yet stronger cone that produces unprecedented sound definition at a higher output.
Titanium Tweeter Dome: A strong, heat-resistant and light material, chosen to reproduce bright and critical detail for the true audiophile experience.
True Marine Design: Complies with international IP65 water and dust resistance standards (from the front).
Featuring a fully sealed crossover and tweeter housing, water resistant cone and surround.
True Marine Protection: Engineered to withstand the harsh marine environment and tested to international ASTM standards for UV stability (ASTM-G154) and salt-fog resistance (ASTM-B117).
3 Pairs of Speaker Grilles Provided: 3 different grille options are provided to ensure they seamlessly integrate with the aesthetics of your boat or RV.
Note: MS-FR4021 does not come with the sports grille option.
Features:
3 Year Warranty
Environmental Resistant Speaker Grille
Titanium Tweeter Dome
Curv Cone Material
Max power (Watts): 200
Efficiency (1W/1M): 91dB
Frequency response: 70Hz-22kHz
Impedance: 4 Ohms
Mounting Dimension: 5-1/8"
Mounting Depth: 2-13/16"
IP65 Compliant
Model: FR6022
SKU: 010-01848-00…

Manufacturer
Fusion
Model
010-01848-00
6" x 9" 2-Way Marine Speakers (White) 350 Watt 1-pr. MR692W

6" x 9" 2-Way Marine Speakers (White) 350 Watt 1-pr. MR692W

Fully Marinized is the term we use for our Marine and Outdoor products that are Weather Proof.
We integrate high-tech, state-of-the-art waterproofing materials plus special UV coatings for plastic surfaces, coated circuit boards and connections to protect the product against the harsh outdoor elements and resist corrosion.

Features:
Weather Proof Full Range 6" x 9" 2-way Speaker Pair
350 Watts MAX 175 Watts RMS Power Handling per Pair
60 Hz to 20 kHz Frequency Response and 92dB Sensitivity
Polypropylene Woofer Cone and Treated Cloth Surround
1 Tweeter Per Speaker
Sold in Pairs

SKU: MR692W.…

Manufacturer
Boss Audio
Model
MR692W
600A GEN I Mercury Control Cable  6' (Premium) CCX179

600A GEN I Mercury Control Cable 6' (Premium) CCX179

Teleflex TFXTREME Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All TFXTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 6'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17906
600A GEN I Mercury Control Cable  6' (Standard) C5X06

600A GEN I Mercury Control Cable 6' (Standard) C5X06

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser® applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X06 or CC17906 is a 6 foot cable)

Series: Standard
Length: 6'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X06
600A GEN I Mercury Control Cable  7' (Premium) CCX179

600A GEN I Mercury Control Cable 7' (Premium) CCX179

Teleflex TFXTREME Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All TFXTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 7'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17907
600A GEN I Mercury Control Cable  7' (Premium) CCX179

600A GEN I Mercury Control Cable 8' (Premium) CCX179

Teleflex TFXTREME Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All TFXTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 7'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov

Teleflex TFXTREME Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All TFXTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 8'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17908
600A GEN I Mercury Control Cable  7' (Standard) C5X07

600A GEN I Mercury Control Cable 7' (Standard) C5X07

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X07 or CC17907 is a 7 foot cable)

Series: Standard
Length: 7'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X07
600A GEN I Mercury Control Cable  8' (Standard) C5X08

600A GEN I Mercury Control Cable 8' (Standard) C5X08

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X08 or CC17908 is a 8 foot cable)

Series: Standard
Length: 8'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X08
600A GEN I Mercury Control Cable  9' (Premium) CCX179

600A GEN I Mercury Control Cable 9' (Premium) CCX179

Teleflex TFXTREME Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All TFXTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 9'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17909
600A GEN I Mercury Control Cable  9' (Standard) C5X09

600A GEN I Mercury Control Cable 9' (Standard) C5X09

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X09 or CC17909 is a 9 foot cable)

Series: Standard
Length: 9'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X09
600A GEN I Mercury Control Cable 10' (Premium) CCX179

600A GEN I Mercury Control Cable 10' (Premium) CCX179

Teleflex TFXTREME Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All TFXTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 10'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17910
600A GEN I Mercury Control Cable 10' (Standard) C5X10

600A GEN I Mercury Control Cable 10' (Standard) C5X10

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X10 or CC17910 is a 10 foot cable)

Series: Standard
Length: 9'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X10
600A GEN I Mercury Control Cable 10' (Standard) CC179

600A GEN I Mercury Control Cable 10' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 10'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17910
600A GEN I Mercury Control Cable 11' (Premium) CCX179

600A GEN I Mercury Control Cable 11' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique XTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 11'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17911
600A GEN I Mercury Control Cable 11' (Standard) C5X11

600A GEN I Mercury Control Cable 11' (Standard) C5X11

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X11 or CC17911 is a 11 foot cable)

Series: Standard
Length: 11'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X11
600A GEN I Mercury Control Cable 11' (Standard) CC179

600A GEN I Mercury Control Cable 11' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 11'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17911
600A GEN I Mercury Control Cable 12' (Premium) CCX179

600A GEN I Mercury Control Cable 12' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 12'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17912
600A GEN I Mercury Control Cable 12' (Standard) C5X12

600A GEN I Mercury Control Cable 12' (Standard) C5X12

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X12 or CC17912 is a 12 foot cable)

Series: Standard
Length: 12'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X12
600A GEN I Mercury Control Cable 12' (Standard) CC179

600A GEN I Mercury Control Cable 12' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 12'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17912
600A GEN I Mercury Control Cable 13' (Premium) CCX179

600A GEN I Mercury Control Cable 13' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 13'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17913
600A GEN I Mercury Control Cable 13' (Standard) C5X13

600A GEN I Mercury Control Cable 13' (Standard) C5X13

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X13 or CC17913 is a 13 foot cable)

Series: Standard
Length: 13'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X13
600A GEN I Mercury Control Cable 13' (Standard) CC179

600A GEN I Mercury Control Cable 13' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 13'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17913
600A GEN I Mercury Control Cable 14' (Premium) CCX179

600A GEN I Mercury Control Cable 14' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 14'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17914
600A GEN I Mercury Control Cable 14' (Standard) C5X14

600A GEN I Mercury Control Cable 14' (Standard) C5X14

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X14 or CC17914 is a 14 foot cable)

Series: Standard
Length: 14'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X14
600A GEN I Mercury Control Cable 14' (Standard) CC179

600A GEN I Mercury Control Cable 14' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 14'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17914
600A GEN I Mercury Control Cable 15' (Premium) CCX179

600A GEN I Mercury Control Cable 15' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 15'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17915
600A GEN I Mercury Control Cable 15' (Standard) C5X15

600A GEN I Mercury Control Cable 15' (Standard) C5X15

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X15 or CC17915 is a 15 foot cable)

Series: Standard
Length: 15'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X15
600A GEN I Mercury Control Cable 15' (Standard) CC179

600A GEN I Mercury Control Cable 15' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 15'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17915
600A GEN I Mercury Control Cable 16' (Premium) CCX179

600A GEN I Mercury Control Cable 16' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 16'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17916
600A GEN I Mercury Control Cable 16' (Standard) C5X16

600A GEN I Mercury Control Cable 16' (Standard) C5X16

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X16 or CC17916 is a 16 foot cable)

Series: Standard
Length: 16'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X16
600A GEN I Mercury Control Cable 16' (Standard) CC179

600A GEN I Mercury Control Cable 16' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 16'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17916
600A GEN I Mercury Control Cable 17' (Premium) CCX179

600A GEN I Mercury Control Cable 17' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 17'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17917
600A GEN I Mercury Control Cable 17' (Standard) C5X17

600A GEN I Mercury Control Cable 17' (Standard) C5X17

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X17 or CC1791 i7s a 17 foot cable)

Series: Standard
Length: 17'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X17
600A GEN I Mercury Control Cable 17' (Standard) CC179

600A GEN I Mercury Control Cable 17' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 17'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17917
600A GEN I Mercury Control Cable 18' (Premium) CCX179

600A GEN I Mercury Control Cable 18' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 18'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17918
600A GEN I Mercury Control Cable 18' (Standard) C5X18

600A GEN I Mercury Control Cable 18' (Standard) C5X18

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X18 or CC17918 is a 18 foot cable)

Series: Standard
Length: 18'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X18
600A GEN I Mercury Control Cable 18' (Standard) CC179

600A GEN I Mercury Control Cable 18' (Standard) CC179

Seastar Solutions (Teleflex) CC179 Mercury/Mercruiser Cables 600A Series covers 1965-Present Mercury Engine Cable/
Features stainless steel Lubricore core wire for smooth operation, long life and and 8" minimum bend radius
Black HDPE outer casing for durability and best resistance to UV and chemicals.

Fits: Mariner / Mercury / Mercruiser 1965 - date (Cannot be used with 4000 series controls. Use Gen II cables)
Force 1993 - date with Mercury controls.
Mariner engines with Mercury/Mariner controls (except pre-1993 40HP & lower models)

Note: GEN I cables have round black mounting logs on both engine and control ends
GEN II has round black log on engine end and cable clamp on control end

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.
"Measure Twice Order Once"

Length: 18'
Series: 600A
Grade: Standard

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CC17918
600A GEN I Mercury Control Cable 19' (Premium) CCX179

600A GEN I Mercury Control Cable 19' (Premium) CCX179

Teleflex XTREME Premium Control Cable's unique design incorporates a patent-pending splined-core which allows easy movement and minimum lost motion (4" min. bend radius).
Simply the best cable in the business.

Teleflex’s unique TFXTREME technology incorporates a patented splined core.
Ridges on the core allow a close fit with the cable’s inner liner, but with minimum contact, so the core glides back and forth smoothly like a skater on ice.

RESULT: a control cable with easy movement AND minimum lost motion.
HDPE jacket is made with a high-density polyethylene material that is very hard, abrasion resistant and provides a high resistance to water penetration while offering a low coefficient of friction.

Features:
.34” Super Tough HDPE Jacket for ultimate protection against the elements
Unique splined core minimal contact point (core to liner)
Long wearing HDPE liner: Ultra smooth & lubed for life
Designed for complex and/or long cable runs (or to simply create a superior feel)
Ideal for foot throttle applications on performance boats/bass boats.
All XTREME cables are available in 1 foot increments.

Designed to fit Mariner®/Mercury®/MerCruiser®(1965-date)
Force®(1993-date) with Mercury® controls.
All Mariner engines with Mercury®/Mariner® controls(except pre-1993 40 HP & lower models).
All 1993-date Force®(US Marine) with Force®/US Marine/Mercury® controls

Check Your Cable Numbers printed midway or at engine end.
The Last two numbers is the length in feet.
Old Morse cables will be the last three numbers in inches.

"Measure Twice Order Once"

Length: 19'
Series: 600A
Grade: Premium (Xtreme)

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Seastar Solutions
Model
CCX17919
600A GEN I Mercury Control Cable 19' (Standard) C5X19

600A GEN I Mercury Control Cable 19' (Standard) C5X19

Uflex C5 series cables feature an 18 laywire conduit for enhanced efficiency, durability and longevity the C5 cables have brass end fittings.
They are suitable for use as drop in replacements for Mercury/Mercruiser applications (1965 to present engines).

Interchanges with Teleflex and Seastar Solutions CC179 series control cables

Check Your Cable for part numbers printed midway or engine engine
The last two numbers on your control cable is the length
(Example: C5X19 or CC17919 is a 19 foot cable)

Series: Standard
Length: 19'

⚠ WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov…

Manufacturer
Uflex USA
Model
C5X19
Result Pages:
Manufacturers